Cleaning Fiber Optics is Important - A Full Line of Fiber Optic Cleaning Supplies

Bottled Isopropyl Alcohol

Pre-filled foam swabs are also available in addition to our 28oz bottles.



Part # F1-000728

Canned Isopropyl Alcohol

This 99% reagent grade isopropyl is used in cleaning fiber or fiber optic connector endfaces for better transmission performance.Part


# F1-0068

Pre-Moistened Fiber Optic Alcohol Wipes

Fast evaporating alcohol pre-moistened wipes can be used with optical fiber to remove dirt, dust and oils. Contains: Isopropanol

Fiber Optic Cleaning Solution

This fast-acting cleaner can be used with dry fiber wipes or tissues to remove dirt and soils from optical fibers prior to termination and fiber optic splicing or to clean the end of connector ferrules.

Part # F1-6706

Fiber Optic Wipes

Non-Woven cloth wipes can be used alone or with alcohol or solvents. Provides superior cleaning of fiber optic connector ferrules without risk of scratching or lint residue.

Part # F1-6702

Fiber Optic Lint-Free Tissues

These inexpensive tissues can be used dry or with several cleaning solvents to clean off ferrule endfaces or prepare fibers for termination and/or splicing.

Part # F1-6705

Bottled Alcohol w/Spray Top

Our 8oz spray bottles are available in glass and plastic as well.




Part # F1-0007SP

Fiber Optic Disposal Unit

A handy and safe solution for disposing of cleaved fiber ends. Perfect for on-site installers. Snap-on cover has holes for receiving fiber pieces or cover may be removed to expose plastic catch webbing.

Part # F1-8328C

Fiber Optic Cleaning Swabs

When cleaning connector endfaces inside bulkheads, mating sleeves and other recessed areas, you'll appreciate the extended reach that our 2.5mm and 1.25mm swabs provide. Choose from wrapped swabs, foam swabs or general purpose cotton swabs.

Part # F1-25184, F1-25123, F1-0005, F1-0006

Icky-Clean Fiber Optic Degreaser Wipes

FIS new Icky-Clean wipes can be used with outside plant optical or copper cables. Utilize to remove Icky-Pic or gels from cables previous to splicing or termination. Great to clean up fiber optic tools as well.

Part # F1-1010

Fiber Optic Cleaning Pen

Use this cleaning pen to apply solution to cleaning wipe for removal of contaminants from optical fiber. Cleaner can be used with swabs to clean fiber optic adapters too.



Part # F1-6709

Canned Air For Fiber Optics

Before removing a fiber optic connector for inpection or cleaning, make sure the area around the connector is free from dust. The FIS Micro Duster includes an extension nozzle to provide a powerful blast of air to remove particles from areas that are otherwise inaccessible. Competitively priced.

Part # F1-1007S

Fiber Optic Matching Gel

To reduce optical loss within fiber optic mechanical splices and connectors, apply optical couplant at the interface of the two matted fibers. This minimizes loss by reducing the difference in the index of refraction between the mated fibers.



Part # F1-0001V

Fiber Optic Piano Wire

A smart way to save a connector when a fiber breaks inside a ferrule during connectorization. Also an excellent tool to remove broken fiber from bare fiber adapters. The 0.004" (110um) diameter wire is also used in the connectorization process to apply epoxy to protruding fiber at ferrule. Sticky colored tabs provided to hold wire.

Part # F1-8265