Cable Management

Single sided vertical cable manager provides flexible, effective and safe way to manage various cables.

These Horizontal Duct Cable Managers are designed for use with any standard size open frame racks, wall enclosures and floor enclosures. They have a single-sided finger-duct design with a removable cover lid.

Cable hooks or J-Hooks are an excellent solution for supporting cables of all types. Cable to Beam fasteners rotate 360 degrees to allow cable to run in any direction and they do accept cable ties. The exclusive Qwik-Latch cable retainers provide secure containment of cables.

Utilize plastic distribution rings or “D” rings, to attach to a backboard, ceiling or a wall to support voice and data cables. The plastic rings feature rounded edges that will prevent damage to the wire and cable in addition to allowing for easier “pull.” Available in 2”, 3” or 5” sizes.

It’s easy for installers to over-cinch thin zip ties, resulting in macrobends that attenuate fiber otpic cables. With copper cables, the weight of cables pressing against thin ties can damage or deform them enough to create crosstalk issues. To solve these problems, FIS created the Universal Cable Strap with Foam Padding. FIS Fiber Optic Tie Wraps are 1” wide and 12” long, and they are available in your choice of colors. Substitute “X” with color of your choice: AQ = Aqua, BK = Black,
BL = Blue, GR = Green, OR = Orange, and YE = Yellow.

The FIS Basic Fiber Optic Tie Wrap is just like the current FIS Fiber Optic Tie Wrap offer, but without the padding. It is designed for communications cable with the wide design profile and reusable nature. FIS Basic Tie Wraps are 1” wide and 12” long, and they are available in your choice of colors. Substitute “X” with color of your choice: AQ = Aqua, BK = Black, BL = Blue, GR = Green, OR = Orange, and YE = Yellow.

Bring your fiber optic cable installation to a new level with color match VELCRO® Brand ONE-WRAP® straps. Colors match fiber cable for enhanced cable type identification and installation appearance. VELCRO® Brand ONE-WRAP® straps are a safe alternative to other cable ties and will not pinch, damage or introduce unwanted insertion loss into the fiber network and are designed to bring your fiber network install from ordinary to extraordinary.

This VELCRO® Brand Roll dispenses just like a tape roll and can be cut to the desired length. The center core of the roll has a male/female Velcro patch attached, which enables the roll to be affixed to any ladder or steel surface for convenient dispensing.

Protect your Fiber Optic and Category cable from over cinching with tie wraps. These low-cost wraps are reusable and are available in red and black. Now provided with cutout for screw mount support.

The ability to secure a connector or cable to a desired location is possible with this adhesive backed clamp.
Re-enterable and adjustable up to 5/8’’.

Designed to hold up to six 3.0mm fiber optic cables, this bracket provides expansion capabilities to fiber optic systems. Made from flame retardant nylon, cables snap into grooves without damaging the fiber.

Available from FIS are two sizes of tie wraps. The 4” long by 1/8” wide wrap is excellent for securing simplex or duplex cable. The 7” long by 3/16” wide wrap is designed to handle wrap diameters up to 1-1/4”.

Use the Cable Clamp to organize copper or fiber cords and bulk cable. These clamps are available in 2 sizes: small (holding up to 1” in diameter), and large (up to 3”).

Rugged, versatile, and packed with time-saving features, the Rhino™ 5200 meets key ANSI and TIA/EIA 606-A labeling standards – and labels up to 77% faster than the competition. Proprietary Rhino “Hot Key” to automatically size, space and format text for perfect patch panel labels – then press another to print matching cable flags or face plate tabs, without retyping. Print module and fixed-length labels, horizontal and vertical wire wraps, terminal and 110 blocks and much more. Print Code 39 and Code 128 barcodes. Access 100+ industry symbols, fractions, and punctuation marks with a few quick keystrokes. Add the optional quick-charging lithium-ion battery for uninterrupted productivity.

DYMO RHINO™ ACCESSORIES

A dispenser holding 10 rolls of tape, numbered 0-9, gives you the ability to tag patch cables in your fiber optic system for easy identification. The 0-9 rolls of tape may be purchased under a separate part number. Replace “X” with desired number 0-9 for replacements.