Fiber Optic Wall Mount Enclosures

The FIS Titan box is a NEMA 4-rated industrial-style wall mount suitable for ISP or OSP environments. It includes a detachable master panel, (4) cable managers, splice tray riser, cable securement bracket, and a back panel (16” x 6”) with 96 mounting holes for layout customization, accommodating up to (12) LGX adapter panels with a total capacity of 144 (288 LC) fibers. Cable grommets accepts an outer diameter of 18-25mm. LGX adapter plates not included.

The FIS Titan Mini is an industrial-style wall mount with a NEMA 4 rating for ISP or OSP environments. It accommodates (4) LGX adapter panels, includes a cable spool, bridge stances, and a mounting stud and nut for splice trays. Unlike the full-size Titan wall mount, the Mini is not customizable. LGX adapter plates not included.

This FIS Zone Enclosure is a ceiling-mounted 2RU, that can hold up to 144 fibers (LC). Fits in 2ft x 2ft drop ceilings. This cross-connect is intended to patch and distribute infrastructure cables from one zone to another within a dedicated network. The enclosure is equipped with a completely detachable master panel capable of accommodating (6) LGX adapter panels. Additionally, it features a back panel with 96 mounting holes arranged in a 16”x6” configuration. These two features allow you to fully customize the internal layout to meet any job requirements. Each enclosure is supplied with mounting hardware, which includes steel threaded tie wire and anchors.

The FIS Zone Electrical Box Outlet Enclosure attaches directly to a single gang electrical box that may be at the end of a cable pathway. A single-panel box designed to protect and house small fiber counts for patching from zone trunk cables to individual locations. Ideal for Fiber to the Desk (FTTD) and other LAN, PON, and in-building applications.

The FIS Compact Wall Mount has capacity for (1) or (2) LGX style adapter plates or MPO/MTP cassettes depending on the size of enclosure. The compact form factor along with an included Din Rail mount allows the enclosure to be mounted virtually anywhere. Equipped with a fully removable door makes either splicing pigtails or patching pre-terminated cables simple. 40mm splice sleeves (F1100240C-50) are recommended for use in these enclosures.

The FIS Mini Wall Mount has capacity for (1) or (2) LGX style adapter plates, depending on the size of the enclosure chosen. Ideal for patching smaller quantities of fibers in a compact form factor. Fiber enters and exits from the bottom of the closure, and a cable spool and tie down stance provide fiber management options. A single door is removable and lockable with a padlock (not included).

The FIS Economy Wall Mount has capacity for (2) or (4) LGX style adapter plates depending on the size of the enclosure chosen. It features a cable spool, bridge stances and a mounting stud and nut to secure splice trays. The lockable inner door (lock/key included) provides safe storage of incoming cable while allowing the technician to manipulate outgoing fiber patches. The outer door is removable and lockable with a padlock (sold separately). Accommodates QTY (2) splice trays approximately 7”L x 4”W (Ex. F1-SPL12). Ask an FIS sales associate about pre-loading the enclosure with fiber pigtails, splice trays and adapter plates.

The FIS Deluxe Wall Mount has capacity for (2), (4), (8), or (12) LGX style adapter plates depending on the size of the enclosure chosen. It features a larger splicing bay and more cable spooling brackets than the Economy version. Bridge stances and a splice tray mounting stud and nut are also included for easy installation of splice trays. The two front doors are removable to give unrestricted access during installation, and each door is also lockable with a padlock (sold separately) to provide security when in use. Accommodates QTY (2) splice trays approximately 7”L x 4”W (Ex. F1-SPL12) or 11.72”L x 4”W (Ex. F1-SPL24). Ask an FIS sales associate about pre-loading the enclosure with fiber pigtails, splice trays and adapter plates.

The FIS Single Door Wall Mount is a rugged 16 gauge cold rolled steel enclosure that can hold up to (4) LGX adapter plates. This enclosure is designed for use where space is at a premium. Some key features include the solid front door and exposed adapter plate master panel. Two cable entries along with the flat front door allows these enclosures to be “stacked” . Now featuring a central member strain relief kit.

The FIS Patch and Splice Wall Mount enclosure is lightweight and easy to install. There is capacity for (2), (4), or (8) LGX style adapter plates depending on the size of the enclosure chosen. This unit features a lockable (lock/key included) compact housing that allows both splicing and connecting of fiber optic cables. FF-WM012 accommodates QTY (1) splice tray approximately 7”L x 4”W (Ex. F1-SPL12). FF-WM024 accommodates QTY (2) splice trays approximately 7”L x 4”W (Ex. F1-SPL12). FF-WM048 accommodates QTY (4) splice trays approximately 7”L x 4”W (Ex. F1-SPL12) or 11.72”L x 4”W (Ex. F1-SPL24).

The FIS Wall Mount Splice Enclosure provides a secure splice bay for up to (12) splice trays. Cable entry and exit holes are now located on the tops and sides of the unit, and are protected by 1.25” dust-proof grommets. Both doors are removable for easy access and lockable for added security. Cable management rings are moveable within the unit and cable tie-downs are located throughout the unit. Constructed from lightweight, sturdy 16 gauge steel for easy installation. Recommended splice tray is 11.72”L x 4”W (Ex. F1-SPL24). Splice trays not included.

The ISP Slack Box is designed to easily store and protect bulk excess fiber cable. This wall mountable enclosure is 14.64” (W) x 3.31” (D) x 14.15” (H) and can hold up to 70mtr of 7.5mm cable. Two cable entries on the top and bottom of the closure along with four half circle cable management rings allows you to store cable with ease.

This 19” Wall Mount Swing Frame Rack features an open-back wall mount design ideal for mounting over existing equipment and physical obstacles (conduit, telephone equipment, etc.). Use for mounting patch panels, hubs and switches in a secure room or closet. Rugged steel construction with 100lb weight capacity. Ships ready to assemble.

This 19” Wall Mount Rack is self-squaring and allows for virtually any data or telecommunications component to be installed. Ideal for wall mounting fiber-optic equipment, its fixed design prevents kinking or breaking of glass fibers. Rugged steel construction; includes rack screws. Ships ready to assemble.

Wall Mount Enclosures offer a locking front door that is reversible for left or right side opening. Its swing out feature allows easy access to the back of equipment with a key lock to prevent tampering. Enclosures have vented fixed side panels for better air flow and pre-installed 110VAC 80CFM cooling fans to keep equipment running cool. It also includes adjustable cage nut rails and cage nuts with standard #12-24 mounting screws. Rails are marked with RU space index. Enclosure ships fully assembled. Additional enclosures are available with 20RU and 28RU heights. Call your FIS sales representative for details on shipping and enclosures not listed below.

EZ Assembly 600 Series Wall Mount Enclosures offer many convenient features. Locking front door is reversible for left or right side opening. Enclosures have vented fixed side panels for better air flow and pre-installed 110VAC 80CFM cooling fans keep equipment running cool. Also includes adjustable cage nut rails and cage nuts with standard #12-24 mounting screws. Rails are marked with RU space index. Ships in Knockdown Box