Indoor Plastic Enclosure Products

This low profile wall mount enclosure is constructed of white rugged plastic and provides internal fiber management options. It accepts up to eight fusion or mechanical splices. The included accessory kit contains mounting screws, an identification label and two cable ties.

Utilize this compact wall mount box for fusion splice sleeve storage or direct connector termination. Simply place two small cable ties through the back of the box, slide the cable (max 5mm OD) into the box and secure. Next use the small cable management spool to store some slack prior to splicing or termination. There are two knock-out slots on each side of the box for (2) SC simplex or LC duplex adapters. There are also two knock-out slots on each side of the box for (1) SC duplex or LC quad adapter. Adapters without flanges are required. Built in splice sleeve holders accommodate up to two 40mm heat shrink splice sleeves.

The FIS splice enclosure utilizes a 12 position molded splice chip to secure splices. It is wall mountable and recommended for installation within controlled environments. Cable entry grommets secure incoming and outgoing cable with an outer diameter between 7mm and 12mm. Internal fiber management guides provide the ability to coil excess fiber.

The FIS 4 Port Wall Mount box is a compact design ideal for data center applications. It can be wall mounted or placed in a floor box, and will house up to 4 fibers, inline adapters and pigtails. Cables are easily terminated or spliced together. This wall mount box also has options for incoming fiber to be presented via mini-trunking grommets. Adapters and splice chip sold separately.

A versitile high performance demarcation closure for indoor or outdoor applications. With its unique interior grid pattern the MPC allows for custom configuration and mounting of a wide array of components. NEMA 4 rated and supplied with knockouts for up to 8 entry points. Contact an FIS sales representative for custom configurations. Bulkhead kit is compatible with PLP adapter plates (not LGX compatible).

CORNING® EDC product family continues to set the standard for the future of interconnect hardware. These units are designed for the protection of fiber optic connections and splices in indoor or outdoor environments; the EDC is ideal for industrial, marine, security, or traffic control applications. The EDC series accepts CCH panels and splice trays. Does not accept CCH cassettes. No entry holes provided on EDC series cabinets. NEMA 4X Rated. Also Available in Stainless Steel.