Temporary Splice Accessories

ELASTOMERIC LAB SPLICE

The improved FIS Elastomeric Lab Splice is ideal for making temporary fiber connections and can be reused hundreds of times. To use the splice for instrument testing, simply insert a cleaved pigtail from OTDR or Power Meter and the cleaved unconnectorized fiber to be tested. Excellent for both Multimode and Singlemode fiber, the splice accepts fiber cladding diameters of 125µm to 140µm. The Lab Splices are supplied in blister packs of 6 (containing one of each color: pink, peach, yellow, green, blue and purple) or 12 (containing 2 of each color.)

  Description

  Part #

  Pack of 6   FIS-1140-6
  Pack of 12   FIS-1140-12
  Lab Splice Holder   LBSHLDR

ANRITSU OTDR BARE FIBER PIGTAIL KIT

Save time by testing optical fibers without connectorizing. Easy-to-use, only a single drop of index matching oil is required. Strip, clean and cleave the fiber then insert into the unit until the end face meets the permanently mounted fiber. Specs: Choice of ST, SC or FC style connectors, Insertion Loss 0.6dB, Typical # of insertions: 2000.

Kit Includes: FiberConnect, Manual, Index Matching Oil, Maintenance Kit, Cleaning Brush, Magnetic Stand, Carry Case and Spare Pigtail.

  Description

  Part #

  FiberConnect Kit with SC/UPC pigtail   FIBERCONNECT1-USC
  FiberConnect Kit with ST/UPC pigtail   FIBERCONNECT1-UST
  FiberConnect Kit with FC/UPC pigtail   FIBERCONNECT1-UFC

DIVOT BARE FIBER TESTING DEVICE

The Divot™ is a faster system that uses index matching gel in disposable cartridges to allow for low loss connections and is much more forgiving of the quality of the cleaved fiber end. Each cartridge typically yields 500 insertions - 2 cartridges are included with the kit. Replacement cartridges can be purchased in packs of 3 or 12.

  Description

  Part #

  Divot™ Bare Fiber Testing Device - SC 9µm Singlemode, 62.5µm and 50µm Multimode   DVT-SMB3
  Divot™ Replacement OCC Cartridge 3 pk   DVT-RC3
  Divot™ Replacement OCC Cartridge 12 pk   DVT-RC12

PREMIER BARE FIBER ADAPTER

Use this adapter for launching an OTDR or test set into an unconnectorized optical fiber for loss or length verification. Adapter can be cleaned easily if fiber breaks off during use. Specs: SC/UPC connector style plug-in, Typical insertion loss 1.0dB.

Kit Includes: Bare Fiber Adapter, Zipper Case, 122mtr SM Fiber Launch Reel with SC/UPC connectors, Cleaning Wire Kit and Instructions.

  Description

  Part #

  Bare Fiber Adapter Launch Reel Kit   202073

FIS UNIVERSAL TESTING SLEEVE

Designed specifically for testing applications, the FIS Universal Testing Sleeve reduces labor time while testing fiber optic patch cables with standard for 2.5mm ferrules. Adapters for ST or FC reference cord are available.

  Description

  Part #

  FIS ST to 2.5mm Universal Test Adapter   F1-81UNIV
  FIS FC to 2.5mm Universal Test Adapter   F1-85UNIV
To Top