OptiSnap® SC Connector, single-mode, APC, ceramic ferrule, single pack, green housing, green 900 µm boot, only compatible with 250 µm cable
$565.50
In stock
SKU
OSNPSCA250Z
Click For More Information...
- Singlemode, APC, 2500µm
- Ceramic Ferrule
- 3db Typical Loss
Product Features:
- No-epoxy/no-polish or other consumables required Quick and easy installation, less than one minute per connector on average
- 100 percent factory tested for insertion loss Typical insertion loss of 0.2 dB for UPC and 0.3 dB for APC connectors
- Factory-polished end face Low insertion loss and high-performance return loss
- Reliable, proven mechanical splice technology Over 70 million connectors deployed in various applications
- No need for electrical power for ovens or lights Reduces complexity
- Angled Fiber Stub Inside all OptiSnap connectors regardless of polish to maximize back reflection performance
Click For More Information...
With proven field-installable connector technology, fiber terminations using the OptiSnap™ connector system are fast, easy and reliable. Corning high-precision mechanical splice technology enables fiber optic networks to be installed quickly and cost effectively. The Corning go/no-go feedback signal allows the installer to verify that the installation is performed right the first time, every time. Insert the fiber, activate the cam and watch the pass/fail light illuminate, instilling confidence in every connector installed. The factory-polished ceramic ferrule provides superior quality for end-face geometry. The singlemode OptiSnap™ Connector is available in an ultra physical contact (UPC) polish or an angled physical contact (APC) polish, offering you a higher grade of performance for your field terminations. With fast installation time and low insertion loss, the OptiSnap Connector system provides a good alternative to fusion splicing. Installation is as easy as strip, clean, cleave, cam and crimp.
Click For More Information...