-
FIS Fiber Optic Patch Cable, LC to SC APC-UPC, 1 meter, 1.6mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: X9LAYUS1FISCU Unit of Measurement : EA$8.45 Qty Buy as low as $7.61 -
-
-
FIS Fiber Optic Patch Cable, LC to SC APC-UPC, 10 meters, 1.6mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: X9LAYUS10FISCU Unit of Measurement : EA$10.65 Qty Buy as low as $9.59 -
![FIS Pulse Box #1 SM OS2 SC/ST UPC-100 meters]()
-
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC to LC APC-APC, 5 meters, 1.6mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: X9LALAS5FISCU Unit of Measurement : EA$10.40 Qty Buy as low as $9.36 -
![FIS Loose Tube Node Cable]()
FIS Loose Tube Node Cable, 6 Fiber, SM, SC/UPC Pigtail, 15 meters SKU: NC3BUPS15FIS6 Unit of Measurement : EA$184.00 -
![FIS Pulse Box #1 SM OS2 SC/FC UPC-100 Meters]()
-
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC to LC APC-APC Unibody, 3 meters, 1.6mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: X9LALAS3FISCUNI Unit of Measurement : EA$14.35 -
![FIS Loose Tube Node Cable]()
FIS Loose Tube Node Cable, 4 Fiber, SM, SC/UPC Pigtail, 15 meters SKU: NC3BUPS15FIS4 Unit of Measurement : EA$150.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC to LC APC-APC, 3 meters, 1.6mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: X9LALAS3FISCU Unit of Measurement : EA$9.90 Qty Buy as low as $8.91 -
![FIS Loose Tube Node Cable]()
FIS Loose Tube Node Cable, 2 Fiber, SM, SC/UPC Pigtail, 15 meters SKU: NC3BUPS15FIS2 Unit of Measurement : EA$119.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
