-
FIS 900um Pigtail, 6 Fiber, Multimode 62.5um OM1, ST/PC, Beige Boots, 3 Meters SKU: SP6STMMBG Unit of Measurement : EA$12.00 -
FIS Distribution Pigtail, 12 Fiber, Singlemode, SC/UPC, Blue Boots, 3 Meters SKU: DSP12SCUPCBU Unit of Measurement : EA$26.25 -
FIS Fiber Optic Patch Cable, LC PC to SC PC, 3 meters, 1.6mm Simplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: Y8LYM3FISC Unit of Measurement : EA$4.60 Qty Buy as low as $4.14 -
FIS 900um Pigtail, 12 Fiber, Multimode 50um OM2, LC/PC, Black Boots, 3 Meters SKU: SP12LCMM50BLK Unit of Measurement : EA$26.50 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 6 Fiber, Multimode 50um OM2, ST/PC, Black Boots, 3 Meters SKU: SP6STMM50BLK Unit of Measurement : EA$12.00 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Multimode 50um OM3, LC/PC, Aqua Boots, 3 Meters SKU: SP12LCMM50GAQ Unit of Measurement : EA$26.75 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Singlemode, SC/UPC, Blue Boots, 3 Meters SKU: SP12SCUPCBU Unit of Measurement : EA$26.50 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Multimode 62.5um OM1, LC/PC, Beige Boots, 3 Meters SKU: SP12LCMMBG Unit of Measurement : EA$26.50 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Singlemode, SC/APC, Green Boots, 3 Meters SKU: SP12SCAPCGR Unit of Measurement : EA$28.50 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Singlemode, LC/UPC, Blue Boots, 3 Meters SKU: SP12LCUPCBU Unit of Measurement : EA$29.50 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Multimode 62.5um OM1, SC/PC, Beige Boots, 3 Meters SKU: SP12SCMMBG Unit of Measurement : EA$23.50 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC to LC APC-APC, 3 meters, 1.6mm, Simplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: Y9LALAS3FISCU Unit of Measurement : EA$4.95 Qty Buy as low as $4.46
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
