-
FIS Fiber Optic Patch Cable, SC PC to ST PC, 3 meters, 1.6mm Duplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: X8Y8M3FISC Unit of Measurement : EA$6.90 Qty Buy as low as $6.21 -
FIS Ribbon Fanout Pigtail, 12 Fiber, Singlemode, FC/APC, 3 Meters SKU: RF3AAPS3FIS12 Unit of Measurement : EA$158.00 -
FIS Snap Pack, 6 Fiber, Singlemode, ST/UPC, Off White Plate, 3 Meters SKU: F1ST6LSSPN Unit of Measurement : EA$60.00 -
FIS Snap Pack, 6 Fiber, Multimode 62.5um OM1, ST/PC, Black Plate, 3 Meters SKU: F1ST6LMSPNBLK Unit of Measurement : EA$60.00 -
![FIS Ribbon Fanout Pigtail, 12 Fiber, Singlemode, LC/UPC, 3 Meters]()
FIS Ribbon Fanout Pigtail, 12 Fiber, Singlemode, LC/UPC, 3 Meters SKU: R3LUPS3FIS12 Unit of Measurement : EA$40.00 -
![FIS Snap Pack]()
FIS Snap Pack, 6 Fiber, Singlemode, SC/UPC, Black Plate, 3 Meters SKU: F1SC6LSSPNBLK Unit of Measurement : EA$60.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, ST PC to LC PC, 3 meters, 1.6mm Duplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: X28LM3FISC Unit of Measurement : EA$7.40 Qty Buy as low as $6.66 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC to FC APC-APC, 3 meters, 3mm, Simplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: S9YA7AS3FISCU Unit of Measurement : EA$4.50 Qty Buy as low as $4.05 -
![FIS Snap Pack]()
FIS Snap Pack, 6 Fiber, Multimode 62.5um OM1, SC/PC, Black Plate, 3 Meters SKU: F1SC6LMSPNBLK Unit of Measurement : EA$55.00 -
![FIS Ribbon Fanout Pigtail Kit]()
FIS Ribbon Fanout Pigtail Kit, 12 Fiber, Singlemode 9/125, SC/UPC, 3 Meter SKU: R3YUPS3FIS12C Unit of Measurement : EA$40.35 -
![FIS Snap Pack]()
FIS Snap Pack, 12 Fiber, Singlemode, LC/UPC, Black Plate, 3 Meters SKU: F1LC6DLSPNBLK Unit of Measurement : EA$105.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC PC to SC PC, 3 meters, 1.6mm Duplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: X8LYM3FISC Unit of Measurement : EA$7.40 Qty Buy as low as $6.66
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
