-
FIS Snap Pack, 6 Fiber, Multimode 50um OM2, SC, Black Plate, 3 Meters SKU: F1SC6LM50SPNBLK Unit of Measurement : EA$100.00 -
FIS Snap Pack, 6 Fiber ,Multimode 50um OM3, SC, Off-White Plate SKU: F1SC6LM50GSPN Unit of Measurement : EA$110.00 -
FIS Patch Cable Simplex 3mm SM 9/125 Ultra FC/APC-FC/UPC-3 Meters SKU: S97A7US3FISCU Unit of Measurement : EA$6.80 -
FIS Snap Pack, 6 Fiber, Singlemode, SC/APC, Black Plate, 3 Meters SKU: F1SC6APCSPNBLK Unit of Measurement : EA$65.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC PC to LC PC, 3 meters, 1.6mm Duplex MM ClearCurveOM2 Fiber SKU: X1YLM3FISC Unit of Measurement : EA$7.40 Qty Buy as low as $6.66 -
![FIS Snap Pack]()
FIS Snap Pack, 12 Fiber, Multimode 50um OM2, Duplex, LC/PC, Off White Plate, 3 Meters SKU: F1LC6DLM50SPN Unit of Measurement : EA$80.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, FC to FC APC-APC, 3 meters, 3mm, Simplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: S97A7AS3FISCU Unit of Measurement : EA$4.50 Qty Buy as low as $4.05 -
![FIS Snap Pack]()
FIS Snap Pack, 12 Fiber, Multimode 50um OM3, Duplex, LC/PC, Black Plate, 3 Meters SKU: F1LC6DLM50GSPNBLK Unit of Measurement : EA$80.00 -
![FIS Snap Pack]()
FIS Snap Pack, 12 Fiber, Singlemode, Duplex, SC/UPC, Black Plate, 3 Meters SKU: F1DSC6LSSPNBLK Unit of Measurement : EA$80.00 -
![FIS Snap Pack]()
FIS Snap Pack, 12 Fiber, Singlemode, Duplex, SC/UPC, Off White Plate, 3 Meters SKU: F1DSC6LSSPN Unit of Measurement : EA$80.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC PC to LC PC, 3 meters, 1.6mm Duplex MM ClearCurveOM2 Fiber SKU: X1LLM3FISC Unit of Measurement : EA$7.65 Qty Buy as low as $6.89 -
![12 Fiber]()
FIS Snap Pack, 12 Fiber, Multimode 62.5um OM1, Duplex, SC/PC, Off White Plate, 3 Meters SKU: F1DSC6LMSPN Unit of Measurement : EA$80.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
