-
Black MTP Opposed adapter Reduced Flange with 1 Dust Plug - MTP footprint - 50pk SKU: MTPRFADPT50 Unit of Measurement : EA$185.75 -
-
Ubiquiti Device Bridge Pro, 5GHz Wireless Bridging with PoE SKU: UDBPro Unit of Measurement : EA$199.00 -
Ubiquiti Compact Multi-WAN UniFi Cloud Gateway w/Routing SKU: UCGULTRA Unit of Measurement : EA$129.00 -
![FIS Copper Cat 6A Patch Cable with Snagless Boots 3ft Green]()
FIS Copper Cat 6A Patch Cable with Snagless Boots 3ft Green SKU: CT608103AGR Unit of Measurement : EA$3.85 -
![1x4, 1x8, 1x12 Fiber SM Elite Female MTP Housing with Push/Pull Boots]()
1x4, 1x8, 1x12 Fiber SM Elite Female MTP Housing with Push/Pull Boots SKU: 24615 Unit of Measurement : EA$6.85 -
![AFL Fujikura 100S Standard Fusion Splicer Kit (with cleaver)]()
AFL Fujikura 100S Standard Fusion Splicer Kit (with cleaver) SKU: S018655 Unit of Measurement : EA$11,479.00 -
![Black MTP Opposed adapter Reduced Flange with 1 Dust Plug - MTP footprint - 100pk]()
Black MTP Opposed adapter Reduced Flange with 1 Dust Plug - MTP footprint - 100pk SKU: MTPRFADPT100 Unit of Measurement : EA$325.00 -
![AFL FUSECONNECT,SC,PC,MM,62.5UM,3.0MM,PACK OF 6,BEIGE,GEN 5]()
AFL FUSECONNECT,SC,PC,MM,62.5UM,3.0MM,PACK OF 6,BEIGE,GEN 5 SKU: FUSE2SC3M626 Unit of Measurement : EA$88.36 -
![Lightera Battery for S177, S123, S153, S178)]()
-
![Viavi Multimode/Singlemode 850/1300/1310/1550 NM OTDR w/LS PC on Singlemode/Multimode]()
Viavi Multimode/Singlemode 850/1300/1310/1550 NM OTDR w/LS PC on Singlemode/Multimode SKU: E4146QUADPC Unit of Measurement : EA$7,085.00 -
![Ubiquiti U6 In-Wall]()
Ubiquiti Wall Mount WiFi 6 access point w/built-in PoE Switch SKU: U6IW Unit of Measurement : EA$179.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
