-
FIS SC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 20dB SKU: F18731A20 Unit of Measurement : EA$10.25 Qty Buy as low as $9.23 -
FIS SC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 15dB SKU: F18741A15 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
-
FIS Fusion Splice Protection Sleeve Ribbon 40mm with Glass Ceramic Strength Member Clear 25 Pack SKU: F11011CPSR-25 Unit of Measurement : EA$30.00 Qty Buy as low as $27.00 -
![EXFO 20W AC/DC Adapter North America MAX-700C/MAX-94X]()
-
![AFL Fusion Splicer Power Cord ACC-14 for Power Supply ADC-13]()
AFL Fusion Splicer Power Cord ACC-14 for Power Supply ADC-13 SKU: S014536 Unit of Measurement : EA$22.00 -
![Corning® Adapter Panel CCH Singlemode Loaded with (6) Duplex LC UPC Adapters (12-Fiber) Ceramic Insert]()
Corning® Adapter Panel CCH Singlemode Loaded with (6) Duplex LC UPC Adapters (12-Fiber) Ceramic Insert SKU: CCHCP12A9 Unit of Measurement : EA$126.10 -
![FIS Snap Pack 12 Fiber Singlemode Duplex SC/APC Color Coded Pigtail Off White Plate 3 Meters]()
FIS Snap Pack 12 Fiber Singlemode Duplex SC/APC Color Coded Pigtail Off White Plate 3 Meters SKU: F1DSC6IAPCSPN Unit of Measurement : EA$80.00 -
![Corning® Adapter Panel CCH Multimode (50um OM3) Loaded with (6) Duplex LC Adapters (12-Fiber) 10 Gig-Auqa]()
Corning® Adapter Panel CCH Multimode (50um OM3) Loaded with (6) Duplex LC Adapters (12-Fiber) 10 Gig-Auqa SKU: CCHCP12E4 Unit of Measurement : EA$115.00 -
![AFL Adapter Plate]()
AFL Adapter Plate, Black, 6 SC Simplex SM, Blue, Zirconia Sleeve, LGX 118 SKU: FM003100 Unit of Measurement : EA$30.25 -
![Corning® CCH Panel 3 Port SM LC Duplex Adapter]()
-
![AFL Splice Tray Kit Single Fusion 12F 2RU]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
