-
16 Fiber SM Elite Female MTP Housing with Push/Pull Boots - 50pk SKU: 24677100 Unit of Measurement : EA$580.00 -
-
16 Fiber SM Elite Female MTP Housing with Push/Pull Boots - 50pk SKU: 2467750 Unit of Measurement : EA$322.25 -
16 Fiber MM Elite Male MTP Housing with Push/Pull Boots 100pk SKU: 24670100 Unit of Measurement : EA$746.00 -
![AFL FUSECONNECT,LC,PC,MM,50UM 10GIG,2.0MM,PACK OF 6,AQUA,GEN]()
AFL FUSECONNECT,LC,PC,MM,50UM 10GIG,2.0MM,PACK OF 6,AQUA,GEN SKU: FUSE2LC2M50L6 Unit of Measurement : EA$88.36 -
![16 Fiber MM Elite Male MTP Housing with Push/Pull Boots 50pk]()
16 Fiber MM Elite Male MTP Housing with Push/Pull Boots 50pk SKU: 2467050 Unit of Measurement : EA$413.35 -
![AFL FUSECONNECT,LC,PC,MM,62.5UM,2.0MM,PACK OF 6,BEIGE,GEN 5]()
AFL FUSECONNECT,LC,PC,MM,62.5UM,2.0MM,PACK OF 6,BEIGE,GEN 5 SKU: FUSE2LC2M626 Unit of Measurement : EA$88.36 -
![16 Fiber MM Elite Female MTP Housing with Push/Pull Boots 100pk]()
16 Fiber MM Elite Female MTP Housing with Push/Pull Boots 100pk SKU: 24668100 Unit of Measurement : EA$580.00 -
![AFL FUSECONNECT,LC,APC,SM,2.0MM,PACK OF 6,GREEN,GEN 5]()
AFL FUSECONNECT,LC,APC,SM,2.0MM,PACK OF 6,GREEN,GEN 5 SKU: FUSE2LC2SMA6 Unit of Measurement : EA$88.36 -
![16 Fiber MM Elite Female MTP Housing with Push/Pull Boots 50pk]()
16 Fiber MM Elite Female MTP Housing with Push/Pull Boots 50pk SKU: 2466850 Unit of Measurement : EA$322.25 -
![AFL FUSECONNECT,LC,UPC,SM,2.0MM,PACK OF 6,BLUE,GEN 5]()
AFL FUSECONNECT,LC,UPC,SM,2.0MM,PACK OF 6,BLUE,GEN 5 SKU: FUSE2LC2SMU6 Unit of Measurement : EA$88.36 -
![1x4, 1x8, 1x12 Fiber SM Elite Male MTP Housing with Push/Pull Boots 50pk]()
1x4, 1x8, 1x12 Fiber SM Elite Male MTP Housing with Push/Pull Boots 50pk SKU: 2561850 Unit of Measurement : EA$544.45
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
