-
FIS Blue Tactical Cable Multimode 12 Fiber | Plus Corning® ClearCurve® OM4 Multimode Fiber SKU: FBOM4TACCABLE12 Unit of Measurement : EA$9.45 -
FIS SC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 18dB SKU: F18741A18 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 18dB SKU: F18761A18 Unit of Measurement : EA$11.35 Qty Buy as low as $10.22 -
FIS LC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 12dB SKU: F18771A12 Unit of Measurement : EA$13.95 Qty Buy as low as $12.56 -
![FIS Dust Cap Mating Sleeve Adapter LC 1.25 Unibody White - 100 Pack]()
FIS Dust Cap Mating Sleeve Adapter LC 1.25 Unibody White - 100 Pack SKU: 931CAPW Unit of Measurement : EA$35.00 -
![FIS ST MM Stainless Connector Drilled to 260um]()
-
![Signamax Modular Plug Cat6 8P/8W UTP Solid Wire Plug w/Insert (100pk)]()
Signamax Modular Plug Cat6 8P/8W UTP Solid Wire Plug w/Insert (100pk) SKU: KRJ456SLD100 Unit of Measurement : EA$81.50 -
![Corning® CCH 12 Fiber Cassette SM Duplex SC/UPC & Pigtail]()
Corning® CCH 12 Fiber Cassette SM Duplex SC/UPC & Pigtail SKU: CCHCS1259P00RE Unit of Measurement : EA$422.70 -
![FIS FIBER FENCE 10 Acre Kit]()
-
![Corning® SC Connector Multimode Anaerobic Ceramic Single Pack]()
Corning® SC Connector Multimode Anaerobic Ceramic Single Pack SKU: 9510141SP Unit of Measurement : EA$8.25 -
![Corning® ST Connector Singlemode Heat Cure Zirconia 3mm-White]()
Corning® ST Connector Singlemode Heat Cure Zirconia 3mm-White SKU: 9525006SP Unit of Measurement : EA$4.85 -
![Fluke Networks Modules Kit Quad CERTIFIBER® PRO Multimode and Singlemode Loss Modules]()
Fluke Networks Modules Kit Quad CERTIFIBER® PRO Multimode and Singlemode Loss Modules SKU: CFPQADD Unit of Measurement : EA$13,267.25
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
