-
AFL FUSECONNECT,SC,PC,MM,62.5UM,2.0MM,PACK OF 6,BEIGE,GEN 5 SKU: FUSE2SC2M626 Unit of Measurement : EA$88.36 -
AFL Fujikura 100S Fusion Splicer without Bluetooth (machine only) SKU: S018693 Unit of Measurement : EA$10,250.00 -
EXFO FTB LITE 720D Singlemode Access OTDR, 1310/1550 nm, 38/36 dB SKU: FTBLITE720DSM1OIXEAEUI91FRFGP10061 Unit of Measurement : EA$8,625.00 -
FIS XGS-PON Power Meter, reads 1270/1310/1490/1550/1577nm SKU: F1XGPONA Unit of Measurement : EA$1,295.00 -
![16 Fiber SM Elite Male MTP Housing with Push/Pull Boots]()
-
![Sumitomo Q102LITE-CORE Fusion Splicer Kit with FC-8R Cleaver and Fiber Holders]()
Sumitomo Q102LITE-CORE Fusion Splicer Kit with FC-8R Cleaver and Fiber Holders SKU: Q102LITECOREKIT8RFH Unit of Measurement : EA$8,819.75 -
![AFL FUSECONNECT,SC,PC,MM,50UM 10GIG,2.0MM,PACK OF 6,AQUA,GEN]()
-
![Ubiquiti Cloud Gateway Fiber]()
-
![EXFO AXS-130 Compact Singlemode OTDR, FTTx/PON, 1310/1550/Filtered 1650 nm, 42/40/39 dB]()
EXFO AXS-130 Compact Singlemode OTDR, FTTx/PON, 1310/1550/Filtered 1650 nm, 42/40/39 dB SKU: AXS130SM8OPM2EAEUI91 Unit of Measurement : EA$10,280.00 -
![EXFO AXS-120 Last-mile/Access Compact Singlemode OTDR, 1310/1550 nm, 35/33 dB]()
EXFO AXS-120 Last-mile/Access Compact Singlemode OTDR, 1310/1550 nm, 35/33 dB SKU: AXS120SM1EAEUI91 Unit of Measurement : EA$4,750.00 -
![16 Fiber SM Elite Female MTP Housing with Push/Pull Boots]()
-
![FIS PON (EZ) Meter; downstream - GPON & XGPON (w/RF Overlay) 1490/1550/1577nm]()
FIS PON (EZ) Meter; downstream - GPON & XGPON (w/RF Overlay) 1490/1550/1577nm SKU: EZPONPMPLUS Unit of Measurement : EA$995.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
