-
FIS XGS-PON Power Meter, reads 1270/1310/1490/1550/1577nm SKU: F1XGPONA Unit of Measurement : EA$1,295.00 -
FIS Copper Cat 6A Patch Cable with Snagless Boots 10ft White SKU: CT608110AWH Unit of Measurement : EA$8.15 -
FIS Copper Cat 6A Patch Cable with Snagless Boots 3ft Orange SKU: CT608103AOR Unit of Measurement : EA$3.85 -
FIS Copper Cat 6A Patch Cable with Snagless Boots 3ft Green SKU: CT608103AGR Unit of Measurement : EA$3.85 -
![FIS Copper Cat 6A Patch Cable with Snagless Boots 3ft Blue]()
FIS Copper Cat 6A Patch Cable with Snagless Boots 3ft Blue SKU: CT608103ABU Unit of Measurement : EA$3.85 -
![EXFO FLS-190 High-Power Visual Fault Locator (VFL)]()
-
![FIS 900um Pigtail, 12 Fiber, Multimode, 50um OM3, SC/PC, Aqua Boots, 3 Meters]()
FIS 900um Pigtail, 12 Fiber, Multimode, 50um OM3, SC/PC, Aqua Boots, 3 Meters SKU: SP12SCMM50GAQ Unit of Measurement : EA$23.95 -
![FIS Channel Analyzer, DWDM 96 Channel, SC/APC with VIS300 Probe and Tips]()
FIS Channel Analyzer, DWDM 96 Channel, SC/APC with VIS300 Probe and Tips SKU: OV350DW96VIS Unit of Measurement : EA$4,995.00 -
![FIS Copper Cat 6A Patch Cable with Snagless Boots 3ft Black]()
FIS Copper Cat 6A Patch Cable with Snagless Boots 3ft Black SKU: CT608103ABK Unit of Measurement : EA$3.85 -
![FIS 16-Fiber MPO VFL with Polarity Verrifier & Probe-Deluxe Kit]()
FIS 16-Fiber MPO VFL with Polarity Verrifier & Probe-Deluxe Kit SKU: OVMPOVFL16 Unit of Measurement : EA$2,995.00 -
![FIS Microscope for Benchtop with 10 inch LCD Monitor and BNC Cable]()
FIS Microscope for Benchtop with 10 inch LCD Monitor and BNC Cable SKU: BTS300BNC Unit of Measurement : EA$1,195.00 -
![FIS Fiber Optic Strippers Precision Three Hole]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
