-
Fluke Networks OTDR Quad OPTIFIBER® Pro V2 with Inspection & WiFi SKU: OFP2100QI Unit of Measurement : EA$18,337.25 -
Fluke OTDR Singlemode, OPTIFIBER® Pro, Extended Certif. Inspection Kit SKU: OFP100SI Unit of Measurement : EA$14,275.00 -
-
Fluke Networks OTDR Quad 850/1300/1310/1550nm OPTIFIBER® Pro 28/30/32/30dB SKU: OFP2100Q Unit of Measurement : EA$15,607.25 -
![EXFO MAX-860-1-100optical-Cable Test Dual Port 1Gbit/s]()
EXFO MAX-860-1-100optical-Cable Test Dual Port 1Gbit/s SKU: ETHERCHK1G Unit of Measurement : EA$3,400.00 -
![Viavi SmartOTDR100AS Fiber Instal Tester PLUS Kit 1310/1550n]()
Viavi SmartOTDR100AS Fiber Instal Tester PLUS Kit 1310/1550n SKU: FSTOTDRPLUSIAPC Unit of Measurement : EA$3,295.00 -
![FIS Atlas Mini Singlemode OTDR w/ 1650nm Filtered (LIVE) only]()
FIS Atlas Mini Singlemode OTDR w/ 1650nm Filtered (LIVE) only, 26/24dB, SC/APC Connector SKU: FC1650A26D Unit of Measurement : EA$1,895.00 -
![FIS Atlas Mini-OTDR Singlemode with Video Inspection Probe Kit (APC & UPC tips included)]()
FIS Atlas Mini-OTDR Singlemode with Video Inspection Probe Kit (APC & UPC tips included) SKU: FC1315VMP Unit of Measurement : EA$1,995.00 -
![FIS OTDR]()
FIS OTDR, Singlemode, 1310nm, Firecat, Single Wavelength, Handheld SKU: FIRECAT1310 Unit of Measurement : EA$1,740.70 -
![FIS OTDR]()
FIS OTDR, Singlemode, 1550nm, Firecat, Single Wavelength, Handheld SKU: FIRECAT1550 Unit of Measurement : EA$1,736.50 -
![FIS OTDR]()
FIS OTDR, Multimode, 850nm, Firecat, Single Wavelength, Handheld SKU: FIRECAT850 Unit of Measurement : EA$1,696.75 -
![FIS OTDR Adapter SC Firecat]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
