-
FIS SC Attenuator Female to Female Singlemode 1310/1550 Bulkhead 10dB SKU: F18326SF Unit of Measurement : EA$10.95 Qty Buy as low as $9.86 -
FIS SC Attenuator Female to Female Singlemode 1310/1550 Bulkhead 20dB SKU: F18328SF Unit of Measurement : EA$10.95 -
FIS SC Attenuator Female to Female Singlemode 1310/1550 Bulkhead 5dB SKU: F18325SF Unit of Measurement : EA$10.95 -
FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 13dB SKU: F18751A13 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 13dB]()
FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 13dB SKU: F18761A13 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 11dB]()
FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 11dB SKU: F18761A11 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 14dB]()
FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 14dB SKU: F18761A14 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS LC Attenuator Male to Female Multimode UPC Attenuator 3dB]()
FIS LC Attenuator Male to Female Multimode UPC Attenuator 3dB SKU: F18761A03MM50 Unit of Measurement : EA$28.35 Qty Buy as low as $25.52 -
![FIS Connector Boot SC 2.0mm Red - 25 Pack]()
-
![FIS FC Connector Singlemode 900um White Boot, 100pk]()
FIS FC Connector Singlemode 900um White Boot, 100pk SKU: F12070900100 Unit of Measurement : EA$430.00 -
![FIS FC Connector Multimode Zirconia 900um Boot, 100 pack]()
FIS FC Connector Multimode Zirconia 900um Boot, 100 pack SKU: F12073900100 Unit of Measurement : EA$400.00 -
![OptiSnap® Connector Installation Tool Kit with Flat Cleaver]()
OptiSnap® Connector Installation Tool Kit with Flat Cleaver SKU: TKTOPTISNAPCF Unit of Measurement : EA$2,268.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
