-
Seikoh MT/MPO Pressure Module for 550C/550E3/550S3 SKU: PH55MTPRMA1 Unit of Measurement : EA$2,750.00 -
FIS Polishing Pad 70 Durometer Rubber Square 5.75" x 5.75" with 1/4" Thick Acrylic Plate SKU: PPG575 Unit of Measurement : EA$31.09 -
SN Connector Senko Duplex Ferrule End Face Cleaner, Senko SN Connector One Click Cleaner SKU: SCKDCSN Unit of Measurement : EA$194.55 -
-
![IBC Connector Cleaner H-125 - 1.25mm MIL/AERO Harsh Environment Connectors (12910)]()
IBC Connector Cleaner H-125 - 1.25mm MIL/AERO Harsh Environment Connectors (12910) SKU: 12910 Unit of Measurement : EA$60.00 -
![FIS Epoxy Quick Cure 4 Grams -50 Pack]()
FIS Epoxy Quick Cure 4 Grams -50 Pack SKU: H05100R450 Unit of Measurement : 50PK$295.00 Qty Buy as low as $280.25 -
![Seikoh MT/MPO APC Fixture 24 Position Center Pressure Type]()
Seikoh MT/MPO APC Fixture 24 Position Center Pressure Type SKU: PH55MT8A24S Unit of Measurement : EA$11,000.00 -
![FIS Polishing Pad 70 Durometer Rubber Square 5.75" x 5.75" 1/8" Thick]()
FIS Polishing Pad 70 Durometer Rubber Square 5.75" x 5.75" 1/8" Thick SKU: PP575 Unit of Measurement : EA$20.55 -
![ITW Compact Fiber Optic Cleaning Kit]()
-
![3M-EMSD A/O Lapping Film 9x6.5 2um (50pk)]()
-
![IBC Connector Cleaner M20 for SMPTE 304M & 2.0mm Harsh Environment Connectors (12926)]()
IBC Connector Cleaner M20 for SMPTE 304M & 2.0mm Harsh Environment Connectors SKU: 12926 Unit of Measurement : EA$68.00 -
![Seikoh Connector Cleaner FerruleMate for 2.5mm Connectors/Adapters (SFM250)]()
Seikoh Connector Cleaner FerruleMate for 2.5mm Connectors/Adapters (SFM250) SKU: SFM250 Unit of Measurement : EA$57.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
