-
Signamax 5-Port 10/100/1000BaseT/TX Unmanaged Industrial Swi SKU: 0657405GTB Unit of Measurement : EA$421.60 -
-
FIS QSFP+ Passive Direct Attach Cable, 40Gbps, 3 meters SKU: QSFP40GPDAC3MIO Unit of Measurement : EA$76.00 -
-
![TEMPO Copper Testing Kit 701K-G Professional Tone and Probe Tracing]()
TEMPO Copper Testing Kit 701K-G Professional Tone and Probe Tracing SKU: 701KG Unit of Measurement : EA$98.45 -
![Signamax Keystone Faceplate 3 Port Single Gang with Labeling Windows]()
Signamax Keystone Faceplate 3 Port Single Gang with Labeling Windows SKU: SKFL3 Unit of Measurement : EA$1.10 -
![Signamax Cat5e MT-Series High-Density Keystone Jack, Yellow]()
Signamax Cat5e MT-Series High-Density Keystone Jack, Yellow SKU: KJ458MTC5EYE Unit of Measurement : EA$2.50 -
![FIS Media Switch SC Multimode (2) 100Base-FX & (1) 10/100Base-T/TX Port 3-Port Mini Switch]()
FIS Media Switch SC Multimode (2) 100Base-FX & (1) 10/100Base-T/TX Port 3-Port Mini Switch SKU: F1SWMM1 Unit of Measurement : EA$125.00 -
![FIS 10/100 Base-T/TX to 100 Base-FX Media Converter, SM FC, 20km]()
FIS 10/100 Base-T/TX to 100 Base-FX Media Converter, SM FC, 20km SKU: F1DU1001320FC Unit of Measurement : EA$60.00 -
![Signamax Copper Patch Panel 24-Port Category 6A Unscreened]()
Signamax Copper Patch Panel 24-Port Category 6A Unscreened SKU: 24458C6A Unit of Measurement : EA$201.35 -
![FIS QSFP+ Passive Direct Attach Cable, 40Gbps, 1 meter]()
FIS QSFP+ Passive Direct Attach Cable, 40Gbps, 1 meter SKU: QSFP40GPDAC1MIO Unit of Measurement : EA$68.00 -
![FIS Copper Cat 5e Patch Cable with Boots 3ft Black]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
