-
Signamax 24-Port Cat5e 1U High Density Patch Panel SKU: 24458FTHDC5E Unit of Measurement : EA$112.70 -
Signamax Hardened 10/100Base T/TX to 100Base FX, ST/MM 2km SKU: 0651800ATB Unit of Measurement : EA$230.00 -
Signamax Ethernet Switch 24 Port 10/100 Base T/TX (RJ45) PoE+ 2 - 1000/GbE SFP Ports Unmanaged Switch, 235 watts SKU: SC10030 Unit of Measurement : EA$370.00 -
Signamax Keystone Jack 4-Pair Termination Tool for MT-Series SKU: KJMT8600 Unit of Measurement : EA$28.95 -
![Signamax Keystone Surface-Mount Multimedia Box 4 Port Light Ivory]()
Signamax Keystone Surface-Mount Multimedia Box 4 Port Light Ivory SKU: SMKL4 Unit of Measurement : EA$2.39 -
![Signamax C-100 8 Port Gigabit SFP Switch 2 Gigabit Ports]()
Signamax C-100 8 Port Gigabit SFP Switch 2 Gigabit Ports SKU: SC10121 Unit of Measurement : EA$309.00 -
![Signamax ST MM/SM Fiber Keystone Module White]()
-
![Signamax ST MM/SM Fiber Keystone Module Ivory]()
-
![Signamax Ethernet Switch 24-Port 10/100BaseT/TX Managed Switch]()
Signamax Ethernet Switch 24-Port 10/100BaseT/TX Managed Switch SKU: 0657726S Unit of Measurement : EA$372.00 -
![Signamax SC MM/SM Fiber Keystone Module White]()
-
![Signamax Ethernet Switch 24-Port 10/100/1000BaseT/TX Managed PoE+ Switch with 4-100/1000Base SFP Dual Media Ports plus 2-100/1000Base SFP only Ports, 370 Watts PoE Power]()
Signamax Ethernet Switch 24-Port 10/100/1000BaseT/TX Managed PoE+ Switch with 4-100/1000Base SFP Dual Media Ports plus 2-100/1000Base SFP only Ports, 370 Watts PoE Power SKU: 0657861POEFP Unit of Measurement : EA$1,300.00 -
![Signamax Keystone Module SC Multimode/Singlemode Light Ivory]()
Signamax Keystone Module SC Multimode/Singlemode Light Ivory SKU: CMKSC Unit of Measurement : EA$3.95
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
