-
FIS Adapter Plate 3-Pack SC Duplex Singlemode Green Adapters Loaded (6 Fibers) Off White SKU: F1SC3DBKAPCSUL Unit of Measurement : EA$19.45 -
FIS Adapter Plate 3-Pack LC Duplex Singlemode UPC Blue Adapters Loaded (6 Fibers) Black SKU: F1LC3DBKSUL Unit of Measurement : EA$19.25 -
FIS SC 8-Pack Plate Black Loaded with APC Adapters SKU: F1SC8BKAPCUL Unit of Measurement : EA$24.00 -
FIS LC Duplex 6 Pack SM Blue Adapter Angled Plate- Black SKU: F1LC6DBKSUL45 Unit of Measurement : EA$50.00 -
![FIS LC Duplex 8 Pack Plate Black Loaded w/SM Adapter]()
FIS LC Duplex 8 Pack Plate Black Loaded w/SM Adapter SKU: F1LC8DBKSUL Unit of Measurement : EA$25.00 -
![FIS 8 Pack Adapter Plate Black LC/APC Adapters]()
-
![FIS Adapter Plate 6-Pack LC Quad Singlemode Blue Adapters Loaded (24 Fibers) Black]()
FIS Adapter Plate 6-Pack LC Quad Singlemode Blue Adapters Loaded (24 Fibers) Black SKU: F1LC24BLKSUL Unit of Measurement : EA$35.00 -
![FIS LC/APC Quad 6 Pack SM 24F Green Adapters Plate-Black]()
FIS LC/APC Quad 6 Pack SM 24F Green Adapters Plate-Black SKU: F1LC24BLKAPCSUL Unit of Measurement : EA$35.00 -
![FIS Adapter Plate 6-Pack SC Singlemode APC Green Adapters Ports Angled 45 Degrees Loaded Black]()
FIS Adapter Plate 6-Pack SC Singlemode APC Green Adapters Ports Angled 45 Degrees Loaded Black SKU: F1SC6APCBKUL45 Unit of Measurement : EA$24.00 -
![FIS SC 8 Pack Plate Black Loaded with APC Adapters]()
FIS SC 8 Pack Plate Black Loaded with APC Adapters SKU: F1SC8IBKAPCUL Unit of Measurement : EA$24.00 -
![FIS SC 8-Pack Plate SM Adapters-Black]()
-
![FIS Adapter Plate 6-Pack SC Duplex Singlemode Blue Adapters Loaded (12 Fibers) Black]()
FIS Adapter Plate 6-Pack SC Duplex Singlemode Blue Adapters Loaded (12 Fibers) Black SKU: F1SC6DBKSUL Unit of Measurement : EA$24.75
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
