-
FIS Swing Out Patch Panel 1RU Holds (2) Adapter Plates Unloaded Black SKU: F1RMSO1RU2X Unit of Measurement : EA$115.00 Qty Buy as low as $103.50 -
-
FIS 12F MPO Cassette MM OM3 (x1) MTP/M-LC/UPC Type B SKU: F1MTPMLCOM312B Unit of Measurement : EA$150.00 -
FIS Adapter Plate Bracket, Holds 2 LGX Adapter Plates - Black SKU: F1AB2X Unit of Measurement : EA$11.50 -
![FIS Cable Manager Vertical D-Ring Depth 5.7" for Open Frame Racks (10-Pack)]()
FIS Cable Manager Vertical D-Ring Depth 5.7" for Open Frame Racks (10-Pack) SKU: VD00034 Unit of Measurement : EA$44.45 -
![FIS Cable Manager Vertical D-Ring for Open Frame Racks Depth 5.7"]()
FIS Cable Manager Vertical D-Ring for Open Frame Racks Depth 5.7" SKU: VD00070 Unit of Measurement : EA$50.95 -
![FIS 12-Position 7" x 4" Aluminum Splice Tray]()
-
![FIS 12F MPO Cassette MM OM3 (x1) MTP/M - SC/UPC Type B]()
FIS 12F MPO Cassette MM OM3 (x1) MTP/M - SC/UPC Type B SKU: F1MTPMSCOM312B Unit of Measurement : EA$150.00 -
![FIS 12 Fiber MPOCassette SM OS2]()
FIS 12 Fiber MPOCassette SM OS2, 1 rear MTP/male port, 6 front SC/APC duplex SKU: F1MTPMSCAPCOS212 Unit of Measurement : EA$190.00 -
![FIS Patch Panel 1RU Holds (3) Adapter Plates Solid Door Unloaded Black]()
FIS Patch Panel 1RU Holds (3) Adapter Plates Solid Door Unloaded Black SKU: F1RM1RU3X Unit of Measurement : EA$160.00 Qty Buy as low as $144.00 -
![FIS Patch Panel 2RU Holds (4) Adapter Plates Solid Door Unloaded Black]()
FIS Patch Panel 2RU Holds (4) Adapter Plates Solid Door Unloaded Black SKU: F1RM2RU4X Unit of Measurement : EA$185.00 Qty Buy as low as $166.50 -
![FIS Splice Tray 12 Position Fusion Splice (6.5"L x 4.68"W x .42"H)]()
FIS Splice Tray 12 Position Fusion Splice (6.5"L x 4.68"W x .42"H) SKU: F1SPL12 Unit of Measurement : EA$17.95 Qty Buy as low as $16.16
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
