-
CommScope Splice Tray 72 Count for "D" Closure (Box of 2) SKU: FOSCACCD72 Unit of Measurement : EA$80.00 -
PLP Splice Tray LITE-GRIP Short 2 Yellow Single Fusion Blocks SKU: LGSTS16 Unit of Measurement : EA$23.85 -
PLP Splice Tray LITE-GRIP Long 5 Yellow Single Fusion Blocks SKU: LGSTS40 Unit of Measurement : EA$31.40 -
PLP Standard Splice Tray for 8006877 and 80061055 36 Count SKU: 80810086 Unit of Measurement : EA$33.10 -
![CommScope Splice Chip Fusion 12 Position Plastic for Use In FOSC Trays]()
CommScope Splice Chip Fusion 12 Position Plastic for Use In FOSC Trays SKU: 275897000 Unit of Measurement : EA$2.95 -
![FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H)]()
FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H) SKU: F16808 Unit of Measurement : EA$11.95 -
![FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H)]()
FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H) SKU: F16808M Unit of Measurement : EA$11.95 -
![FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H)]()
FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H) SKU: F16808BA Unit of Measurement : EA$15.95 -
![Multilink Splice Tray Starfighter 12 Position (5.13"L x 6.5"W x .5"H)]()
Multilink Splice Tray Starfighter 12 Position (5.13"L x 6.5"W x .5"H) SKU: 1120SSTP Unit of Measurement : EA$23.95 -
![Multilink Splice Tray Starfighter 12 Position (6.5"L x 4.75"W x .5")]()
Multilink Splice Tray Starfighter 12 Position (6.5"L x 4.75"W x .5") SKU: 1120SSTA Unit of Measurement : EA$25.25 -
![Multilink Splice Tray Starfighter 24 Position (11.75"L x 4"W x .5"H)]()
Multilink Splice Tray Starfighter 24 Position (11.75"L x 4"W x .5"H) SKU: 2000SSTA Unit of Measurement : EA$41.75 -
![AFL Single Fusion Splice Tray - Stores 24 Single Fused]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
