-
FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H) SKU: F16808M Unit of Measurement : EA$11.95 -
FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H) SKU: F16808BA Unit of Measurement : EA$15.95 -
Multilink Splice Tray Starfighter 12 Position (5.13"L x 6.5"W x .5"H) SKU: 1120SSTP Unit of Measurement : EA$23.95 -
Multilink Splice Tray Starfighter 12 Position (6.5"L x 4.75"W x .5") SKU: 1120SSTA Unit of Measurement : EA$25.25 -
![Multilink Splice Tray Starfighter 24 Position (11.75"L x 4"W x .5"H)]()
Multilink Splice Tray Starfighter 24 Position (11.75"L x 4"W x .5"H) SKU: 2000SSTA Unit of Measurement : EA$41.75 -
![FIS Splice Tray 6 Position Fusion Splice (7.5"L x 4.0"W x .63"H)]()
FIS Splice Tray 6 Position Fusion Splice (7.5"L x 4.0"W x .63"H) SKU: F16707BLKH Unit of Measurement : EA$14.95 Qty Buy as low as $13.46 -
![Multilink Splice Tray Starfighter 24 Position (7.75"L x 6"W x .5"H)]()
Multilink Splice Tray Starfighter 24 Position (7.75"L x 6"W x .5"H) SKU: 3000SSTA Unit of Measurement : EA$34.75 -
![FIS Splice Tray 12 Position Fusion Splice (7.5"L x 4.0"W x .63"H)]()
FIS Splice Tray 12 Position Fusion Splice (7.5"L x 4.0"W x .63"H) SKU: F16707BLKF Unit of Measurement : EA$14.95 Qty Buy as low as $13.46 -
![AFL Single Fusion Splice Tray - Stores 24 Single Fused]()
-
![Corning® Splice Tray CCS (12) Fusion Splices or (6) Mass 12F Splices Type 4R for Corning® Wall Mounts]()
Corning® Splice Tray CCS (12) Fusion Splices or (6) Mass 12F Splices Type 4R for Corning® Wall Mounts SKU: M67110 Unit of Measurement : EA$50.75 -
![Corning® Splice Tray CCS (24) Fusion Splices Type 2S]()
-
![AFL Single Fusion Splice Tray]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
