-
-
-
Corning® Spider Fan-Out Kit 24 Fiber Yellow Accepts 250um SKU: SFKP24250S Unit of Measurement : EA$80.75 -
Corning® Environmental Distribution Center Kit EDC 2 NEMA 4 Rated Conduit Fittings for 2" Conduit SKU: EDC2N4KIT Unit of Measurement : EA$128.75 -
![Corning® Environmental Distribution Center Kit EDC 2 Non-Rated Conduit Fittings for 2" Conduit]()
Corning® Environmental Distribution Center Kit EDC 2 Non-Rated Conduit Fittings for 2" Conduit SKU: EDC2ECKIT Unit of Measurement : EA$36.95 -
![Corning® Connector Boot Clip LC 2.0mm 90 Degree Clear]()
Corning® Connector Boot Clip LC 2.0mm 90 Degree Clear SKU: 9540004BPC Unit of Measurement : EA$1.40 -
![Corning® Environmental Distribution Center Kit EDC 2 Watertight Compression Fittings]()
Corning® Environmental Distribution Center Kit EDC 2 Watertight Compression Fittings SKU: EDC2WTKIT Unit of Measurement : EA$56.95 -
![Corning® Connector Boot Clip ST/FC/SC 3.0mm 90 Degree Clear]()
Corning® Connector Boot Clip ST/FC/SC 3.0mm 90 Degree Clear SKU: 9540002BP Unit of Measurement : EA$2.50 -
![Corning® Duplex Cable 3mm]()
Corning® Duplex Cable 3mm, Multimode 62.5/125um, Riser, Orange | Plus Corning® InfiniCor®300 OM2 Multimode Fiber SKU: 2K5131141 Unit of Measurement : Mtr$1.70 -
![Corning® Duplex C10Cable 3mm]()
Corning® Duplex C10Cable 3mm, Singlemode 9/125um, Riser, Yellow | Plus Corning® SMF-28® Ultra Singlemode Fiber SKU: 2E5131131 Unit of Measurement : Mtr$0.65 -
![Corning® Duplex Cable 3mm]()
Corning® Duplex Cable 3mm, Multimode 50/125um, OM2, Riser, Orange | Plus Corning® ClearCurve® OM2 Multimode Fiber SKU: 002T513113124 Unit of Measurement : Mtr$1.15 -
![Corning® Simplex Cable 3mm]()
Corning® Simplex Cable 3mm, Multimode 62.5/125um, Riser, Orange | Plus Corning® InfiniCor®300 OM2 Multimode Fiber SKU: 1K3131141 Unit of Measurement : Mtr$1.05
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
