-
-
-
FIS Duplex 1.6mm SM 9/125 Ultra SC/APC-LC/UPC 3 meters SKU: X9YALUS3FISCU Unit of Measurement : EA$9.65 -
Signamax Keystone Jack T568A/B MT-Series Category 6 High-Density Light Ivory SKU: KJ458MTC6C Unit of Measurement : EA$4.35 -
![Signamax Copper Patch Panel 24-Port High-Density Multimedia Unloaded]()
Signamax Copper Patch Panel 24-Port High-Density Multimedia Unloaded SKU: 24UHDMMP Unit of Measurement : EA$37.95 -
![FIS Optical Splitter Module PLC LC/APC Connector Adapters 1x4 1RU Short LGX Package]()
FIS Optical Splitter Module PLC LC/APC Connector Adapters 1x4 1RU Short LGX Package SKU: Z1PLM141SLLA Unit of Measurement : EA$95.85 Qty Buy as low as $81.47 -
![FIS Optical Splitter PLC LC/APC Connector Adapters 1x16 19" 1RU Rack Mount Package]()
FIS Optical Splitter PLC LC/APC Connector Adapters 1x16 19" 1RU Rack Mount Package SKU: Z1PLM1161RLA Unit of Measurement : EA$368.89 Qty Buy as low as $313.56 -
![FIS Nut Driver 1/2" for Tool Kits]()
-
![FIS Flat Drop Cable Assembly]()
FIS Flat Drop Cable Assembly, Singlemode, Toneable, 1 ZTAP Connector, Pigtail 150 feet | Plus Corning® SMF-28® Ultra Fiber SKU: ZDCT-1-HIP-P-150 Unit of Measurement : EA$50.40 -
![FIS Optical Splitter LC/APC Connectors 1x4 OSP Package 1.5mm Long 2mm Jacketed Leads]()
FIS Optical Splitter LC/APC Connectors 1x4 OSP Package 1.5mm Long 2mm Jacketed Leads SKU: Z1PLCM14OSP20A2LA1.5 Unit of Measurement : EA$78.00 Qty Buy as low as $70.20 -
![FIS Tool Kit Handheld Tool Bag OSP with the Miller Flat Drop Slitter]()
FIS Tool Kit Handheld Tool Bag OSP with the Miller Flat Drop Slitter SKU: F10053OSP Unit of Measurement : EA$825.00 -
![FIS 98 Channel C-Band Hand Held Mini Spectrum Analyzer]()
FIS 98 Channel C-Band Hand Held Mini Spectrum Analyzer SKU: OMA80C Unit of Measurement : EA$6,750.65Out of stock
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
