-
FIS Pocket Visual Fault Locator with 1.25mm Adapter for LC & MU Connectors SKU: F19000125 Unit of Measurement : EA$130.00 Qty Buy as low as $117.00 -
Divot Bare Fiber Testing Device - SC SM, MM 62.5um & 50um SKU: DVTSMB3 Unit of Measurement : EA$395.00 -
-
FIS Fusion Splice Protection Sleeve Standard 60mm 3mm After Shrink Clear 50 Pack SKU: F11002C-50 Unit of Measurement : 50PK$10.50 Qty Buy as low as $9.45 -
![Corning® Bare Fiber ZBL Enhanced Bend Insensitive Singlemode G.657A2/B2 Compliant]()
Corning® Bare Fiber ZBL Enhanced Bend Insensitive Singlemode G.657A2/B2 Compliant SKU: CLEARCURVEZBL Unit of Measurement : Mtr$0.15 -
![TLC Ribbon Cable 12 Fiber Multimode 50/125um (OM3) ClearCurve Riser Aqua]()
TLC Ribbon Cable 12 Fiber Multimode 50/125um (OM3) ClearCurve Riser Aqua SKU: M50RB12CGNRA Unit of Measurement : Mtr$4.00 -
![TLC Tight Buffer Cable 900um Multimode 50/125um OM4 Aqua]()
TLC Tight Buffer Cable 900um Multimode 50/125um OM4 Aqua SKU: M50TB01C4NPA Unit of Measurement : Mtr$0.50 -
![AFL SM Mini-Span 424 ADSS Cable]()
-
![FIS Ribbon/Buffer Tube Fan-Out Kit 6 Fiber Color Coded 25" Tubing Length Accepts 250um]()
FIS Ribbon/Buffer Tube Fan-Out Kit 6 Fiber Color Coded 25" Tubing Length Accepts 250um SKU: F1BF0625M Unit of Measurement : EA$12.85 Qty Buy as low as $11.57 -
![FIS Corrugated Innerduct HDPE Split Wall Orange 500ft Coil]()
FIS Corrugated Innerduct HDPE Split Wall Orange 500ft Coil SKU: F114383SP500 Unit of Measurement : Roll$375.00 -
![FIS Tie Wraps for Fiber Optic Cable Yellow (100 Pack)]()
-
![FIS Fiber Optic Cable Marking 4" Wrap Around Warning Label]()
FIS Fiber Optic Cable Marking 4" Wrap Around Warning Label SKU: F10094F Unit of Measurement : EA$1.95
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
