-
FIS Corrugated Innerduct HDPE Single Wall Orange 250ft Coil SKU: F114363P250 Unit of Measurement : Roll$235.75 -
FIS Cable Management Tie Wrap Foam Padding 1"(W) x 12"(L) White (6-Pack) SKU: FOTWWH6 Unit of Measurement : EA$9.25 -
FIS Fiber Optic Cable Marking 8" Wrap Around Warning Label SKU: F10099SF Unit of Measurement : EA$2.50 -
3M Crimp Tool for Corning® Crimplok and Hot Melt Connectors SKU: 6365CT Unit of Measurement : EA$285.75 -
![Corning® Cable Systems LC Connector UniCam Pretium 50um SX+ 10 gig]()
Corning® Cable Systems LC Connector UniCam Pretium 50um SX+ 10 gig SKU: 9505099X Unit of Measurement : EA$17.50 -
![FIS SC Connector Singlemode Zirconia Ferrule 3.00mm Boot]()
FIS SC Connector Singlemode Zirconia Ferrule 3.00mm Boot, 126um SKU: F13069 Unit of Measurement : EA$3.00 -
![FIS SMA-906]()
FIS SMA-906, Connector, Multimode, 126um, Stainless Steel SKU: F19333 Unit of Measurement : EA$6.95 -
![FIS Dust Cap Connector 1.25 Ferrules Universal White - 100 Pack]()
FIS Dust Cap Connector 1.25 Ferrules Universal White - 100 Pack SKU: F10125 Unit of Measurement : 100$25.00 -
![FIS Zirconia Ferrule 140um Multimode Ferrule w/140 + 6/-0 ID- 25 Pack]()
140um Zirconia Ferrule MM Ferrule w/140 + 6/-0 ID- 25 Pack SKU: F1140K25 Unit of Measurement : 25PK$39.95 -
![FIS Connector Boot LC 2.0mm 90 Degree Green - 25 Pack]()
FIS Connector Boot LC 2.0mm 90 Degree Green - 25 Pack SKU: F1LC90GR25 Unit of Measurement : 25PK$6.25 -
![FIS Cleaning Station Special Edition Kit with IBC Cleaning Tools for 2.5/1.25mm Adapters & MPO/MTP Cleaner]()
FIS Cleaning Station Special Edition Kit with IBC Cleaning Tools for 2.5/1.25mm Adapters & MPO/MTP Cleaner SKU: F16714IBCMPO Unit of Measurement : EA$305.00 -
![FIS Cleaning Wipes Non-Woven Dry Wipes 4" x 4" 12 Packs of 100 Wipes]()
FIS Cleaning Wipes Non-Woven Dry Wipes 4" x 4" 12 Packs of 100 Wipes SKU: F16704 Unit of Measurement : Pkg$28.25 Qty Buy as low as $26.84
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
