-
FIS Rack Mount Enclosure 1RU Loaded with 3 Duplex SC/UPC Plates & Splice Trays Black SKU: F1RM1RU3XSCUPC36 Unit of Measurement : EA$250.00 -
FIS Wall Mount Enclosure 2 Panel Deluxe Loaded with 2 Duplex SC OM3 Plates & Splice Trays Black SKU: F1DW2XSCOM324 Unit of Measurement : EA$159.65 -
FIS FP 1 Gigabit Ethernet 1310-TX/1550-RX WDM LX Singlemode, 10 km range, DDM, MSA Std Compatable SKU: 0DECIO Unit of Measurement : EA$53.85 -
FIS Splice-On Connector Armordillo FC/APC SM SOC 3/2mm Green 10 pack SKU: F1FCAPCSOCA10 Unit of Measurement : EA$100.00 Qty Buy as low as $95.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC PC to SC PC, 10 meters, 1.6mm Duplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: X8YYM10FISC Unit of Measurement : EA$9.60 Qty Buy as low as $8.64 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC PC to LC PC, 3 meters, 1.6mm Duplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: X2LLM3FISC Unit of Measurement : EA$7.65 Qty Buy as low as $6.89 -
![FIS Polarization Maintaining Fiber Optic Patch Cable]()
FIS Polarization Maintaining Fiber Optic Patch Cable, 3mm, Simplex, FC/UPC FC/UPC, Slow Axis, 1 meter SKU: S49U9US1FIS Unit of Measurement : EA$95.00 -
![FIS 1310nm Laser Light Source with FC Adapter]()
Out of stock -
![FIS Universal Breakout Kit Multimode Orange Furcation Tube]()
FIS Universal Breakout Kit Multimode Orange Furcation Tube SKU: F15527 Unit of Measurement : EA$60.35 -
![FIS Basic Cable Tie Wrap Blue (50 Pack)]()
-
![FIS MTRJ Male Singlemode Connector-With Guide Pins]()
-
![FIS Laser Safety Cap Bulkhead FC Green - 25 Pack]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
