-
-
FIS MU Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 20dB SKU: F19521A20 Unit of Measurement : EA$13.95 Qty Buy as low as $12.56 -
FIS Flat Drop Cable, 2 Fiber, Singlemode, Dry, 900um Buffer, Polyethylene, Black, Toneable 24 AWG | Plus Corning® SMF-28® Ultra Fiber SKU: S09FDB02CZEBLG24AWG Unit of Measurement : Mtr$0.65 -
-
![FIS SC/APC Simplex Adapter Green - No Flange]()
FIS SC/APC Simplex Adapter Green - No Flange, Transcul DC SKU: F1247111 Unit of Measurement : EA$1.40 -
![FIS Cleaning Kit Connector End Face]()
-
![FIS Adapter Plate 12-Pack ST LGX Plate Multimode Loaded Black]()
FIS Adapter Plate 12-Pack ST LGX Plate Multimode Loaded Black SKU: F1ST12MULBK Unit of Measurement : EA$24.00 -
![FIS Patch Cable]()
FIS Patch Cable, ST/UPC to LC/UPC, 3 meter, 1.6mm, Duplex, Singlemode | Plus Corning® SMF-28® Ultra Fiber SKU: X98ULUS3FISCU Unit of Measurement : EA$11.35 Qty Buy as low as $10.22 -
![FIS Adapter Plate 12-Pack ST LGX Plate Singlemode Loaded Black]()
FIS Adapter Plate 12-Pack ST LGX Plate Singlemode Loaded Black SKU: F1ST12UBKL Unit of Measurement : EA$24.00 -
![FIS ST Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 15dB]()
FIS ST Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 15dB SKU: F19621A15 Unit of Measurement : EA$10.25 Qty Buy as low as $9.23 -
![FIS Patch Cable]()
FIS Patch Cable, ST/UPC to LC/UPC, 10 meter, 1.6mm, Duplex, Singlemode | Plus Corning® SMF-28® Ultra Fiber SKU: X98ULUS10FISCU Unit of Measurement : EA$13.55 Qty Buy as low as $12.20 -
![FIS ST Connector Singlemode 900um-White, 100 Pack]()
FIS ST Connector Singlemode 900um-White, 100 Pack SKU: F10069900100 Unit of Measurement : EA$225.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
