-
-
FIS Ribbon Fanout Pigtail, 12 Fiber, Singlemode, SC/APC, 3 Meters SKU: RF3BAPS3FIS12 Unit of Measurement : EA$158.00 -
-
FIS LC Duplex 6 Pack MM Beige Adapters 45 degree Plate- Black SKU: F1LC6DBKMUL45 Unit of Measurement : EA$50.00 -
![SC APC to SC APC]()
FIS Fiber Optic Patch Cable, SC APC to SC APC, 3 meters, 3mm, Simplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: S9YAYAS3FISCU Unit of Measurement : EA$4.50 Qty Buy as low as $4.05 -
![FIS SC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 5dB]()
FIS SC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 5dB SKU: F18741A05 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS Splice-On Connector Cheetah FC PC Multimode 50um OM3 900um Aqua 100 Pack]()
FIS Splice-On Connector Cheetah FC PC Multimode 50um OM3 900um Aqua 100 Pack SKU: F1FCOM3SOC100B Unit of Measurement : EA$595.00 Qty Buy as low as $565.25 -
![FIS Rack Mount Enclosure 1RU Loaded with 3 Duplex SC/APC Plates & Splice Trays Black]()
FIS Rack Mount Enclosure 1RU Loaded with 3 Duplex SC/APC Plates & Splice Trays Black SKU: F1RM1RU3XSCAPC36 Unit of Measurement : EA$225.00 -
![FIS Wall Mount Enclosure 2 Panel Deluxe Loaded with 2 Duplex LC/UPC Plates & Splice Trays Black]()
FIS Wall Mount Enclosure 2 Panel Deluxe Loaded with 2 Duplex LC/UPC Plates & Splice Trays Black SKU: F1DW2XLCUPC24 Unit of Measurement : EA$168.85 -
![FIS SFP 1310nm, LX SMF 10km 1000Base DDM MSA]()
-
![FIS Launch Box]()
FIS Launch Box, Style #10, Singlemode OS2, SC/UPC-SC/UPC 500 meters SKU: PS103500RYUYU Unit of Measurement : EA$195.00 -
![FIS Splice-On Connector Armordillo FC/UPC SM SOC 3/2mm White 10 pack]()
FIS Splice-On Connector Armordillo FC/UPC SM SOC 3/2mm White 10 pack SKU: F1FCUPCSOCA10 Unit of Measurement : EA$90.00 Qty Buy as low as $85.50
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
