-
FIS MDU Drop Cable, Singlemode, Pathfinder SC/APC - SC/APC with Mini Pulling Eye Kit, Polyethylene Black, 200 feet (Hand Spooled) | Plus Corning® ClearCurve® LBL Fiber SKU: ZMDUL-1-YA-YA-200-MPE-HS Unit of Measurement : EA$32.98 -
Anritsu Fiber Launch Kit, Singlemode, 100 meters, with Armored Leads, SC/APC SC/APC, Includes SC/APC Adapter SKU: FMTL5 Unit of Measurement : EA$120.00 -
FIS Zeus MST Box, 4 Port, with SC/APC - Pigtail, 1000' SKU: Z1-MST-04-YA-P-1000 Unit of Measurement : EA$311.95 -
FIS Patch & Splice Cassette Kit, Singlemode, SC/APC, 12 Fiber SKU: F1PSCKSCAPC12 Unit of Measurement : EA$145.00 -
![FIS Adapter Plate LC Duplex Multimode 10 Gig Aqua Adapters Loaded (24 Fibers) Off White]()
FIS Adapter Plate LC Duplex Multimode 10 Gig Aqua Adapters Loaded (24 Fibers) Off White SKU: F1LC24DAQMUL Unit of Measurement : EA$40.00 -
![3M-EMSD A/O Lapping Film 6x6 3um (50pk)]()
-
![FIS Orion Series MDU Enclosure 24 SC Ports/48 LC Ports Wall/Pole]()
FIS Orion Series MDU Enclosure 24 SC Ports/48 LC Ports Wall/Pole SKU: Z1-ORI24WM Unit of Measurement : EA$105.95 -
![AFL OptiNID Duo U-grommet entry w/lock Screw No Pitails]()
AFL OptiNID Duo U-grommet entry w/lock Screw No Pitails SKU: OAA1X0XPXSUU Unit of Measurement : EA$26.50 -
![AFL 96 Fiber MM 50um OM4 Micro Distr. w/2mm subs Plenum Aqua]()
AFL 96 Fiber MM 50um OM4 Micro Distr. w/2mm subs Plenum Aqua SKU: GQ096C202CCBCRG Unit of Measurement : EA$2.75 -
![FIS Mini OTDR Dual MM 850nm/1300nm 26/24dB with SC/UPC Connector]()
FIS Mini OTDR Dual MM 850nm/1300nm 26/24dB with SC/UPC Connector SKU: FC8513U26D Unit of Measurement : EA$1,895.00 -
![Fitel Ribbon Fusion Splicer Kit Incl S124X Splicer Body]()
Lightera Ribbon Fusion Splicer Kit Includes S124X Splicer Body SKU: S124XKIT Unit of Measurement : EA$15,847.00 -
![AFL USB-A to USB-C Charge and Data Transfer Cable]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
