-
Signamax Keystone Faceplate 3 Port Single Gang with Labeling Windows SKU: SKFL3 Unit of Measurement : EA$1.10 -
Signamax Cat5e MT-Series High-Density Keystone Jack, Yellow SKU: KJ458MTC5EYE Unit of Measurement : EA$2.50 -
FIS Media Switch SC Multimode (2) 100Base-FX & (1) 10/100Base-T/TX Port 3-Port Mini Switch SKU: F1SWMM1 Unit of Measurement : EA$125.00 -
-
![FIS Patch Panel 4RU Holds (12) Adapter Plates Solid Door Unloaded Black]()
FIS Patch Panel 4RU Holds (12) Adapter Plates Solid Door Unloaded Black SKU: F1RM4RU12X Unit of Measurement : EA$225.00 Qty Buy as low as $202.50 -
![FIS Blue Tactical Cable Singlemode 2 Fiber | Plus Corning® ClearCurve® LBL Fiber]()
FIS Blue Tactical Cable Singlemode 2 Fiber | Plus Corning® ClearCurve® LBL Fiber SKU: FBSMTACCABLE2 Unit of Measurement : Mtr$1.75 -
![FIS LC Connector Duplex Multimode 1.6-2mm Aqua]()
FIS LC Connector Duplex Multimode 1.6-2mm Aqua, 1.6-2mm Aqua Boot SKU: F1606616AQ Unit of Measurement : EA$5.00 -
![FIS Fiber Optic Pulling Eye Kit for Multifiber Cable Assemblies - Orange]()
FIS Fiber Optic Pulling Eye Kit for Multifiber Cable Assemblies - Orange SKU: F11001ORG Unit of Measurement : EA$17.25 -
![2mm]()
TLC Simplex Cable, 2mm, Singlemode, 9/125um, Riser, Yellow | Plus Corning® SMF-28® Ultra Fiber SKU: S09SX01CZNRY20 Unit of Measurement : Mtr$0.18 -
![TLC Duplex Cable]()
TLC Duplex Cable, 3mm, Singlemode, 9/125um, Riser, Yellow | Plus Corning® SMF-28® Ultra Fiber SKU: S09DX02CZNRY Unit of Measurement : Mtr$0.40 -
![FX Brilliance Universal Jacketed 3mm Boot -25 Pack]()
FX Brilliance Universal Jacketed 3mm Boot -25 Pack SKU: AX105215B25 Unit of Measurement : Pkg$33.74 -
![FIS 10/100 Base-T/TX to 100 Base-FX Media Converter, SM FC, 20km]()
FIS 10/100 Base-T/TX to 100 Base-FX Media Converter, SM FC, 20km SKU: F1DU1001320FC Unit of Measurement : EA$60.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
