-
FIS Coupler 1x2 SM Dual Window 1310/1550nm 50/50 Split 250µm SKU: SDW13550122UCTS Unit of Measurement : EA$16.95 -
FIS Fiber Optic Patch Cable, LC PC to ST PC, 2 meters, 1.6mm Duplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: X8L8M2FISC Unit of Measurement : EA$7.20 Qty Buy as low as $6.48 -
FIS Coupler 1x2 SM Dual Window1310/1550nm 50/50 Split 900um SKU: SDW13550129UCTS Unit of Measurement : EA$16.95 -
FIS Cable Management Cable Tie Wraps Nylon 3/16"(W) x 7"(L) SKU: T50S Unit of Measurement : 100$3.25 -
![FIS FC/APC Adapter Singlemode]()
FIS FC/APC Adapter Singlemode,"D" Style2, Square Flanged SKU: F18525 Unit of Measurement : EA$5.00 Qty Buy as low as $4.65 -
![FIS ST Adapter Male to Female Singlemode FC Adapter Simplex 9/125um]()
FIS ST Adapter Male to Female Singlemode FC Adapter Simplex 9/125um SKU: F18705CSTFCS Unit of Measurement : EA$25.00 -
![FIS Connector Boot ST 2.0mm Red - 25 Pack]()
-
![FIS Adapter Plate 6-Pack SC Duplex Universal Unloaded Black]()
FIS Adapter Plate 6-Pack SC Duplex Universal Unloaded Black SKU: F1DSC6IUBK Unit of Measurement : EA$2.75 -
![FIS Snap Pack]()
FIS Snap Pack, 6 Fiber, Multimode 62.5um OM1, ST/PC, Off White Plate, 3 Meters SKU: F1ST6LMSPN Unit of Measurement : EA$90.00 -
![FIS Copper Cat 6 Patch Cable with Boots 15ft Orange]()
-
![SC APC to SC APC]()
FIS Fiber Optic Patch Cable, SC APC to SC APC, 5 meters, 3mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: D9YAYAS5FISCU Unit of Measurement : EA$9.45 Qty Buy as low as $8.51 -
![FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 3dB]()
FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 3dB SKU: F18751A03 Unit of Measurement : EA$13.45 Qty Buy as low as $12.11
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
