-
FIS Rack Mount Enclosure 4RU Loaded with 12 Duplex SC/UPC Plates & Splice Trays Black SKU: F1RM4RU12XSCUPC144 Unit of Measurement : EA$429.19 -
FIS Wall Mount Enclosure 8 Panel Deluxe Loaded with 8 Duplex LC/UPC Plates & Splice Trays Black SKU: F1DW8XLCUPC96 Unit of Measurement : EA$500.00 -
FIS Fiber Optic Patch Cable, LC PC to ST PC, 1 meter, 1.6mm Duplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: X8L8M1FISC Unit of Measurement : EA$7.00 Qty Buy as low as $6.30 -
FIS Fiber Optic Patch Cable, ST PC to LC PC, 5 meters 1.6mm Duplex MM ClearCurveOM2 Fiber SKU: X18LM5FISC Unit of Measurement : EA$8.95 Qty Buy as low as $8.06 -
![FIS Coupler WDM 1x2 SM Dual Window 1310/1550nm 250um]()
FIS Coupler WDM 1x2 SM Dual Window 1310/1550nm 250um SKU: WDM13550122UCTS Unit of Measurement : EA$16.95 -
![FIS LC/PC Female Bulkhead Inspection Tip]()
-
![FIS Cable Management Cable Tie Wraps Nylon 1/8"(W) x 4"(L)]()
FIS Cable Management Cable Tie Wraps Nylon 1/8"(W) x 4"(L) SKU: T18S Unit of Measurement : 100$2.25 -
![FIS ST Adapter Singlemode]()
FIS ST Adapter Singlemode/Multimode SKU: F18200A Unit of Measurement : EA$1.30 Qty Buy as low as $1.21 -
![FIS SC Adapter Male to Female Singlemode ST Adapter 9/125um]()
FIS SC Adapter Male to Female Singlemode ST Adapter 9/125um SKU: F18705CSCSTS Unit of Measurement : EA$25.00 -
![FIS Connector Boot ST 2.0mm Green - 25 Pack]()
-
![FIS Adapter Plate 6-Pack SC Universal Unloaded Black]()
-
![6 Fiber]()
FIS Snap Pack, 6 Fiber, Singlemode, SC/UPC, Off White Plate, 3 Meters SKU: F1SC6LSSPN Unit of Measurement : EA$60.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
