-
AFL Fujikura Fusion Splicer 45S with Fiber Holders and No Cleaver SKU: S018319 Unit of Measurement : EA$3,594.00 -
-
-
FIS SFP+ Active Direct Attach Cable, 10Gbps, 7 meters SKU: SFPP10GADAC7MIO Unit of Measurement : EA$99.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC PC to ST PC, 2 meters, 1.6mm Simplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: Y8Y8M2FISC Unit of Measurement : EA$4.00 Qty Buy as low as $3.60 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC PC to LC PC, 1 meter, 1.6mm Simplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: Y2LLM1FISC Unit of Measurement : EA$4.10 Qty Buy as low as $3.69 -
![FIS 24 Fiber MPO Breakout Cassette]()
FIS 24 Fiber MPO Breakout Cassette, MM 50um OM3, MTP/PC Female LC/UPC, Type A SKU: F1MTPFLCOM324 Unit of Measurement : EA$270.00 -
![FIS Mode Conditioning Fiber Optic Patch Cable]()
FIS Mode Conditioning Fiber Optic Patch Cable, 62.5/125um MM OM1 Fiber, LC/PC ST/PC, 3 meters SKU: F1MCP32LCST Unit of Measurement : EA$70.00 -
![FIS LC/APC SM 9/125um Terminator Connector]()
FIS LC/APC SM 9/125um Terminator Connector, Back Reflection -65dB SKU: F14072 Unit of Measurement : EA$7.95 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 6 Fiber, Multimode 50 um OM3, LC/PC, Aqua Boots, 3 Meters SKU: SP6LCMM50GAQ Unit of Measurement : EA$13.25 -
![FIS Distribution Pigtail]()
FIS Distribution Pigtail, 12 Fiber, Multimode, 50um OM3, LC/UPC, Aqua Boots, 3 Meters SKU: DSP12LCMM50GAQ Unit of Measurement : EA$34.00 -
![Planar Lightwave Circuit Splitter 1x16 PLC with SC/APC Fan Out]()
Planar Lightwave Circuit Splitter 1x16 PLC with SC/APC Fan Out SKU: F1PLC16SCA Unit of Measurement : EA$60.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
