-
-
-
FIS Snap Pack, 12 Fiber, Singlemode, Duplex, LC/UPC, Off White Plate, 3 Meters SKU: F1LC6DLSPN Unit of Measurement : EA$105.00 -
-
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, FC to SC APC-APC, 2 meters, 3mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: D97AYAS2FISCU Unit of Measurement : EA$8.70 Qty Buy as low as $7.83 -
![FIS FC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 1dB]()
FIS FC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 1dB SKU: F18721A01 Unit of Measurement : EA$12.20 Qty Buy as low as $10.98 -
![FIS Coupler 1x3 SM Dual Window 1310/1550nm Even Split 900um]()
FIS Coupler 1x3 SM Dual Window 1310/1550nm Even Split 900um SKU: SDW1351X3333333129CTS Unit of Measurement : EA$17.50 -
![FIS Rack Mount Enclosure 4RU Loaded with 12 Duplex LC/UPC Plates Pigtails & Splice Trays Black]()
FIS Rack Mount Enclosure 4RU Loaded with 12 Duplex LC/UPC Plates Pigtails & Splice Trays Black SKU: F1RM4RU12XLCUPC144SP Unit of Measurement : EA$695.00 -
![FIS 4 Panel Deluxe Wall Mount with 4 LC/PC OM3 Plates Shown Here]()
FIS Wall Mount Enclosure 4 Panel Deluxe Loaded with 4 Duplex SC OM3 Plates Pigtails & Splice Trays Black SKU: F1DW4XSCOM348SP Unit of Measurement : EA$275.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC PC to SC PC, 3 meters, 1.6mm Duplex MM | Plus Corning® ClearCurve® OM4 Multimode Fiber SKU: X10YYM3FISC Unit of Measurement : EA$7.65 Qty Buy as low as $6.89 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC PC to SC PC, 1 meter, 3mm Simplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: S2YYM1FISC Unit of Measurement : EA$3.60 Qty Buy as low as $3.24 -
![FIS ST Connector Multimode 127um Zirconia Ferrule 900um]()
FIS ST Connector Multimode 127um Zirconia Ferrule 900um SKU: F10066900BLK Unit of Measurement : EA$1.90
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
