-
-
-
FIS Snap Pack, 12 Fiber, Multimode 62.5um OM1, Duplex, LC/PC, Off White Plate, 3 Meters SKU: F1LC6DLMSPN Unit of Measurement : EA$80.00 -
-
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, FC to SC APC-APC, 1 meter, 3mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: D97AYAS1FISCU Unit of Measurement : EA$8.45 Qty Buy as low as $7.61 -
![FIS FC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 2dB]()
FIS FC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 2dB SKU: F18721A02 Unit of Measurement : EA$12.20 Qty Buy as low as $10.98 -
![FIS Coupler 1x2 MM 62.5 Dual Window 850/1300nm 50/50 Split 250um]()
FIS Coupler 1x2 MM 62.5 Dual Window 850/1300nm 50/50 Split 250um SKU: MMC28550122CTS Unit of Measurement : EA$50.00 -
![FIS Rack Mount Enclosure 4RU Loaded with 12 Duplex LC/APC Plates Pigtails & Splice Trays Black]()
FIS Rack Mount Enclosure 4RU Loaded with 12 Duplex LC/APC Plates Pigtails & Splice Trays Black SKU: F1RM4RU12XLCAPC144SP Unit of Measurement : EA$775.00 -
![FIS 2 Panel Deluxe Wall Mount with 2 SC/APC Plates Shown Here]()
FIS Wall Mount Enclosure 2 Panel Deluxe Loaded with 2 Duplex LC/APC Plates Pigtails & Splice Trays Black SKU: F1DW2XLCAPC24SP Unit of Measurement : EA$258.00 -
![FIS Standard Yellow Tool Case]()
-
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC PC to SC PC, 2 meters, 1.6mm Duplex MM | Plus Corning® ClearCurve® OM4 Multimode Fiber SKU: X10YYM2FISC Unit of Measurement : EA$7.45 Qty Buy as low as $6.71 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC PC to SC PC, 10 meters, 3mm Simplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: S2YYM10FISC Unit of Measurement : EA$5.90 Qty Buy as low as $5.31
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
