-
FIS Optical Splitter LC/APC Connectors 2x16 OSP Package 1.5mm Long 2mm Jacketed Leads SKU: Z1PLCM216OSP20A2LA1.5 Unit of Measurement : EA$190.00 Qty Buy as low as $171.00 -
FIS Blue Delphi 12-Channel Singlemode Plug to Plug 1 Foot Length SKU: T3DPDPS1FISB12 Unit of Measurement : EA$2,920.85 -
-
FIS Fused Ultra-Wideband Coupler, Singlemode, 1x2, Dual Window 1310/1550nm, 40/60 Split Ratio, 250um, 1 meter Leads SKU: Z1SDW13540122UC Unit of Measurement : EA$24.95 -
![FIS Blank Extended Adapter Plate with No Holes (Unloaded) - Off White]()
FIS Blank Extended Adapter Plate with No Holes (Unloaded) - Off White SKU: F1BLANKUE Unit of Measurement : EA$6.50 -
![FIS FIBER FENCE Duplex Fiber Loop-Back Module]()
-
![FIS MDU Drop Cable]()
FIS MDU Drop Cable, Singlemode, Pathfinder SC/APC - SC/APC with Mini Pulling Eye Kit, Polyethylene White, 125 feet (Hand Spooled) | Plus Corning® ClearCurve® LBL Fiber SKU: ZMDULW-1-YA-YA-125-MPE-HS Unit of Measurement : EA$43.55 -
![FIS Patch & Splice Cassette Kit]()
FIS Patch & Splice Cassette Kit, Multimode OM3, LC/PC, 24 Fiber SKU: F1PSCKLCOM324 Unit of Measurement : EA$260.00 -
![3M-EMSD Diamond Lapping Film 6x6 .5um (25pk)]()
-
![FIS Zeus MST Box, 6 Port, with SC/APC - Pigtail, 250FT]()
FIS Zeus MST Box, 6 Port, with SC/APC - Pigtail, 250FT SKU: Z1-MST-06-YA-P-250 Unit of Measurement : EA$241.95 -
![FIS Crimp Tool Die and Handle .128 Hex .137 &.190 Round]()
FIS Crimp Tool Die and Handle .128 Hex .137 &.190 Round SKU: F13227CR Unit of Measurement : EA$160.00 -
![FIS Flush Mount Panel 1RU SC]()
FIS Flush Mount Panel 1RU SC, OM3/OM4 24 ports SKU: F1FMP1RUSC10GIG24 Unit of Measurement : EA$50.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
