-
-
-
AFL 2.5mm Connector Adapter Universal for OPM Port SKU: 2900520005MR Unit of Measurement : EA$60.00 -
AFL 1.25mm Connector Adapter Universal for OPM Port SKU: 2900520006MR Unit of Measurement : EA$60.00 -
![AFL 2.5mm Connector Adapter Universal for VFL Port]()
AFL 2.5mm Connector Adapter Universal for VFL Port SKU: 2900530001MR Unit of Measurement : EA$60.00 -
![AFL Dust Cap Universal Flip-Top for UCI Outputs]()
-
![AFL FC Connector Adapter for OTDR/OLS Port]()
-
![AFL Connector Inspection System FOCIS Flex without Bluetooth Wi-Fi]()
AFL Connector Inspection System FOCIS Flex without Bluetooth Wi-Fi, (2) User Selected UPC Tips SKU: FOCISFLXNWP4XU Unit of Measurement : EA$2,352.25 -
![AFL FS300325 TRM 3.0 Basic USB Cable 850/1300MM 1310/1550SM]()
AFL FS300325 TRM 3.0 Basic USB Cable 850/1300MM 1310/1550SM SKU: FS300325BASP1W1US1ENGUS Unit of Measurement : EA$9,304.00 -
![AFL Connector Inspection System FOCIS Flex without Bluetooth Wi-Fi]()
AFL Connector Inspection System FOCIS Flex without Bluetooth Wi-Fi, No Tips SKU: FOCISFLXNWP4XN Unit of Measurement : EA$2,251.95 -
![AFL Connector Inspection System FOCIS Flex Bluetooth Wi-Fi Enable with (1) APC Bulkhead & (1) Ferrule Tip]()
AFL Connector Inspection System FOCIS Flex Bluetooth Wi-Fi Enable with (1) APC Bulkhead & (1) Ferrule Tip SKU: FOCISFLXP4XA Unit of Measurement : EA$2,452.50 -
![AFL OTDR Kit 1310/1550nm FlexScan Point to Point PON OTDR OLS OPM VFL Wi-Fi 37/36dB Basic Kit]()
AFL OTDR Kit 1310/1550nm FlexScan Point to Point PON OTDR OLS OPM VFL Wi-Fi 37/36dB Basic Kit SKU: FS200300BASP1W1 Unit of Measurement : EA$5,773.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
