-
PLP Aerial Strand Mount for COYOTE Dome and Terminal Dome SKU: 8004035 Unit of Measurement : EA$30.90 -
AFL Optical Fiber Identifier Bend Insensitive with Power Meter SKU: OFIBIPM Unit of Measurement : EA$2,456.00 -
AFL 24 Fiber 8.4mm Unit Jacket MM 50um 1641' Reel SKU: CP024L841C01BIFAIAP Unit of Measurement : Box$3,938.40 -
FIS Splice-On Connector Armordillo SC Singlemode 3mm / 2mm / 1.6mm Green 10 Pack SKU: F1SCAPCSOCA10 Unit of Measurement : EA$66.50 Qty Buy as low as $63.18 -
![AFL Fusion Splicer Cleaning Kit V-Groove Splicer]()
-
![No Polish Connector MM 50um OM2 SC 250/900um Buffered]()
-
![AFL Thermal Stripper RS02 Strips 200um to 400um Coatings Bluetooth Capable]()
AFL Thermal Stripper RS02 Strips 200um to 400um Coatings Bluetooth Capable SKU: S016816 Unit of Measurement : EA$795.00 -
![FIS PLC Splitter Module 1x32 1.6mm Jacketed 2 Meter Leads with SC/APC Connectors LGX Footprint]()
FIS PLC Splitter Module 1x32 1.6mm Jacketed 2 Meter Leads with SC/APC Connectors LGX Footprint SKU: Z132LGXSCA2 Unit of Measurement : EA$375.00 -
![AFL Thermal Stripper AC Adapter ADC-9A for RS Series Strippers]()
AFL Thermal Stripper AC Adapter ADC-9A for RS Series Strippers SKU: S016820 Unit of Measurement : EA$110.00 -
![FIS Oval Rubber Grommets, Pack of 4, 18mm x 54mm Hole Opening]()
FIS Oval Rubber Grommets, Pack of 4, 18mm x 54mm Hole Opening SKU: F1DLXWMGRMT Unit of Measurement : Pkg$6.60 -
![FIS PLC Coupler 1x2 Unconnectorized]()
-
![TLC Indoor/Outdoor Fiber Optic Cable - Black shown.]()
TLC Indoor/Outdoor Fiber Optic Cable, Simplex ,3mm, Singlemode, 9/125µm, Riser, White | Plus Corning® ClearCurve® LBL Fiber SKU: S09IO01C7NRW30 Unit of Measurement : Mtr$0.39
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
