-
3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-5 SKU: SDR5 Unit of Measurement : EA$5.15 -
3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-6 SKU: SDR6 Unit of Measurement : EA$5.15 -
3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-7 SKU: SDR7 Unit of Measurement : EA$5.15 -
3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-8 SKU: SDR8 Unit of Measurement : EA$5.15 -
![3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-9]()
3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-9 SKU: SDR9 Unit of Measurement : EA$5.15 -
![3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-A]()
3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-A SKU: SDRA Unit of Measurement : EA$2.55 -
![3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-B]()
3M Cable Marking ScotchCode Wire Marker Tape Refill Roll SDR-B SKU: SDRB Unit of Measurement : EA$2.55 -
![3M Cable Marking ScotchCode Wire Marker Tape Dispenser with Tape STD 0-9]()
3M Cable Marking ScotchCode Wire Marker Tape Dispenser with Tape STD 0-9 SKU: STD09X Unit of Measurement : EA$67.00 -
![Viavi NGC-4500-CUQEF-NA Certifier40G Cat6A/Class EA Tier I]()
Viavi NGC-4500-CUQEF-NA Certifier40G Cat6A/Class EA Tier I SKU: NGC4500CUQEFNA Unit of Measurement : EA$24,395.00 -
![TLC Distribution Fiber Optic Cable]()
TLC Distribution Fiber Optic Cable, 2 Fiber, Singlemode, Plenum, Yellow, 4.4mm OD | Plus Corning® SMF-28® Ultra Fiber SKU: S09DI02CZNPY44 Unit of Measurement : Mtr$0.60 -
![FIS OTDR Quad]()
-
![FIS Flat Drop Cable]()
FIS Flat Drop Cable, 2 Fiber, Singlemode, Dry, 900um Buffer, Polyethylene, Black | Plus Corning® SMF-28® Ultra Fiber SKU: S09FDB02CZEBL Unit of Measurement : Mtr$0.55
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
