-
Corning®LEAF® Fiber, Non-Zero Dispersion Shifted, Singlemode, G.655 Compliant SKU: SMFLF Unit of Measurement : Mtr$0.15 -
Corning® Drop Cable SST Singlemode 2 Fiber Dielectric Non Armored SKU: 002EB414101A20 Unit of Measurement : Mtr$0.80 -
Corning® Drop Cable SST Singlemode 4 Fiber Dielectric Non Armored SKU: 004EB414101A20 Unit of Measurement : Mtr$0.90 -
Corning® Cable Systems Mid-Span Access Tool for 5.0mm-24.0mm Tubes SKU: UAT3000 Unit of Measurement : EA$2,365.55 -
![Corning® TKT-UNICAM-PFC High Performance Fiber Optic Tool Kit]()
Corning® TKT-UNICAM-PFC High Performance Fiber Optic Tool Kit SKU: TKTUNICAMPFC Unit of Measurement : EA$2,125.00 -
![Corning® Drop Cable SST Singlemode 12 Fiber Dielectric Non Armored]()
Corning® Drop Cable SST Singlemode 12 Fiber Dielectric Non Armored SKU: 012EB414101A20 Unit of Measurement : Mtr$1.15 -
![Corning® SMF-28e+® OS2 Singlemode Fiber]()
Corning® SMF-28e+® OS2 Singlemode Fiber, Bare Fiber, G652.D Compliant SKU: SMF28E+ Unit of Measurement : Mtr$0.10 -
![CCS]()
CCS, Unicam Installation Kit without Continuity Test Set SKU: TKTUNICAM Unit of Measurement : EA$2,525.75 -
![Corning® Bare Fiber ZBL Enhanced Bend Insensitive Singlemode G.657A2/B2 Compliant]()
Corning® Bare Fiber ZBL Enhanced Bend Insensitive Singlemode G.657A2/B2 Compliant SKU: CLEARCURVEZBL Unit of Measurement : Mtr$0.15 -
![Corning® Cable Systems LC Connector Multimode UniCam 50um 125um Zirconia]()
Corning® Cable Systems LC Connector Multimode UniCam 50um 125um Zirconia SKU: 9505099 Unit of Measurement : EA$17.75 -
![Corning® ClearCurve® OM4 Multimode Fiber]()
Corning® ClearCurve® OM4 Multimode Fiber, Bare Fiber, 50/125um G.651.1 Compliant SKU: CLEARCURVEOM4 Unit of Measurement : Mtr$0.30 -
![Corning® Cable Systems LC Connector UniCam Pretium 50um SX+ 10 gig]()
Corning® Cable Systems LC Connector UniCam Pretium 50um SX+ 10 gig SKU: 9505099X Unit of Measurement : EA$17.50
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
