-
-
-
FIS Flat Drop Cable, 2 Fiber, Singlemode, Dry, 900um Buffer, Polyethylene, Black, Toneable 24 AWG | Plus Corning® SMF-28® Ultra Fiber SKU: S09FDB02CZEBLG24AWG Unit of Measurement : Mtr$0.75 -
AFL Splice Tray Universal (1) 24 Fiber Single Fusion Splice Chip & (1) 48 Mass Fusion Splice SKU: 9112890002 Unit of Measurement : EA$36.30 -
![Signamax Media Switch C-100 16 Port 10/100 Base T/TX (RJ45) PoE+ with 2 1000/GbE SFP Ports Unmanaged Switch]()
Signamax Media Switch C-100 16 Port 10/100 Base T/TX (RJ45) PoE+ with 2 1000/GbE SFP Ports Unmanaged Switch SKU: SC10060 Unit of Measurement : EA$340.00 -
![EXFO Optical Loss Test Set 1310/1550/1625nm MAX945SM3 VFL PM]()
EXFO Optical Loss Test Set 1310/1550/1625nm MAX945SM3 VFL PM SKU: MAX945SM3EAEAEUI91VPM2XFOA54BGP10098 Unit of Measurement : EA$8,365.00 -
![Signamax Media Converter SC Singlemode 10/100 Base T/TX to 100 Base FX 12-Channel]()
Signamax Media Converter SC Singlemode 10/100 Base T/TX to 100 Base FX 12-Channel SKU: 0651200SC20 Unit of Measurement : EA$4,500.00 -
![FIS Media Converter 10/100/1000 2 SFP Slots 4UTP]()
-
![Signamax Media Converter I-1100 Gigabit SFP 2 SFP-Ports Industrial]()
Signamax Media Converter I-1100 Gigabit SFP 2 SFP-Ports Industrial SKU: MI10020 Unit of Measurement : EA$279.00 -
![Leviton Quickport Simplex SC/APC Adapter SM Zirconia White]()
Leviton Quickport Simplex SC/APC Adapter SM Zirconia White SKU: 41085ASW Unit of Measurement : EA$9.60 -
![AFL LGX Adapter Plate Duplex SC MM]()
-
![Signamax 48-Port High Density Unloaded Multimedia Panel]()
Signamax 48-Port High Density Unloaded Multimedia Panel SKU: 48UHDMMP1R Unit of Measurement : EA$37.60
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
