-
FIS FC/UPC SM 9/125um Terminator Connector, Back Reflection -55dB SKU: F12071 Unit of Measurement : EA$6.95 -
FIS 900um Pigtail, 6 Fiber, Multimode 62.5um OM1, SC/PC, Beige Boots, 3 Meters SKU: SP6SCMMBG Unit of Measurement : EA$12.00 -
FIS Distribution Pigtail, 6 Fiber, Multimode, 50um OM3, LC/UPC, Aqua Boots, 3 Meters SKU: DSP6LCMM50GAQ Unit of Measurement : EA$16.95 -
FIS Pocket Visual Fault Locator with 1.25mm Adapter for LC & MU Connectors SKU: F19000125 Unit of Measurement : EA$130.00 Qty Buy as low as $117.00 -
![FIS Mechanical Splice for 125µm Clad Fiber SM or MM]()
-
![FIS Fusion Splice Protection Sleeve Standard 60mm 3mm After Shrink Clear 50 Pack]()
FIS Fusion Splice Protection Sleeve Standard 60mm 3mm After Shrink Clear 50 Pack SKU: F11002C-50 Unit of Measurement : 50PK$10.50 Qty Buy as low as $9.45 -
![FIS Ribbon/Buffer Tube Fan-Out Kit 6 Fiber Color Coded 25" Tubing Length Accepts 250um]()
FIS Ribbon/Buffer Tube Fan-Out Kit 6 Fiber Color Coded 25" Tubing Length Accepts 250um SKU: F1BF0625M Unit of Measurement : EA$12.85 Qty Buy as low as $11.57 -
![FIS Corrugated Innerduct HDPE Split Wall Orange 500ft Coil]()
FIS Corrugated Innerduct HDPE Split Wall Orange 500ft Coil SKU: F114383SP500 Unit of Measurement : Roll$375.00 -
![FIS Tie Wraps for Fiber Optic Cable Yellow (100 Pack)]()
-
![FIS Fiber Optic Cable Marking 4" Wrap Around Warning Label]()
FIS Fiber Optic Cable Marking 4" Wrap Around Warning Label SKU: F10094F Unit of Measurement : EA$1.95 -
![FIS Wire Marker Dipsenser and Tape, Numbers 0 - 9]()
-
![FIS SC Bobtail Connector Multimode Pre-Polished 62.5µm]()
FIS SC Bobtail™ Connector Multimode Pre-Polished 62.5µm SKU: F13066BT Unit of Measurement : EA$4.95
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
