-
TLC Distribution Fiber Optic Cable with Aluminum Interlocking Armor, 6 Fiber, Singlemode, Riser, Yellow, 4.8mm OD | Plus Corning® SMF-28® Ultra Fiber SKU: S09DI06CZNRY48AIA2 Unit of Measurement : EA$2.95 -
FIS SC Stainless Connector drilled to 520um w/Beige Boot SKU: F13061520 Unit of Measurement : EA$4.45 -
FIS LC APC Adapter Duplex Green Singlemode - No Flange, Style 5, SC Footprint SKU: F18015NF Unit of Measurement : EA$1.75 Qty Buy as low as $1.63 -
-
![FIS Splice-On Connector Cordage Holder Fitel Splicers 1.6mm]()
FIS Splice-On Connector Cordage Holder Fitel Splicers 1.6mm SKU: F1SOC30FTLHLDR-16 Unit of Measurement : EA$99.95 -
![FIS Splice-On Connector Cordage Holder Sumitomo Splicers 1.6mm]()
FIS Splice-On Connector Cordage Holder Sumitomo Splicers 1.6mm SKU: F1SOC30SHLDR-16 Unit of Measurement : EA$99.95 -
![FIS Blue Tactical Cable Multimode 2 Fiber | Plus Corning® ClearCurve® OM4 Multimode Fiber]()
FIS Blue Tactical Cable Multimode 2 Fiber | Plus Corning® ClearCurve® OM4 Multimode Fiber SKU: FBOM4TACCABLE2 Unit of Measurement : EA$2.45 -
![AFL Adapter Plate]()
AFL Adapter Plate, Black, 12 Fiber SC SM, Zirconia Sleeve, LGX 118 SKU: FM003297 Unit of Measurement : EA$46.60 -
![AFL Fusion Splicer J-Plate JP-10]()
-
![EXFO Optical Loss Test Set 1310/1550nm MAX945SM1]()
EXFO Optical Loss Test Set 1310/1550nm MAX945SM1 SKU: MAX945SM1EAEAEUI91GP10098 Unit of Measurement : EA$6,175.00 -
![EXFO Optical Loss Test Set 1310/1550nm MAX945SM1 VFL RF]()
EXFO Optical Loss Test Set 1310/1550nm MAX945SM1 VFL RF SKU: MAX945SM1RFVFLEAEUI91 Unit of Measurement : EA$6,895.00 -
![EXFO Optical Loss Test Set 1310/1550nm MAX-945SM1 PM SC]()
EXFO Optical Loss Test Set 1310/1550nm MAX-945SM1 PM SC SKU: MAX945SM1EAEUI91PM2XFOA54BGP10098 Unit of Measurement : EA$7,350.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
