-
EXFO Optical Loss Test Set MAX945SM1 SC/APC VFL PM SKU: MAX945SM1EAEAEUI91VPM2XFOA54BRFGP10098 Unit of Measurement : EA$7,535.00 -
EXFO Optical Loss Test Set 1310/1550nm MAX945SM1 Single Unit SKU: MAX945SM1SCAPC Unit of Measurement : EA$5,635.00 -
-
EXFO Optical Loss Test Set 1310/1550nm MAX945SM1 SC/APC VFL PM RF FIP430B Probe SKU: MAX945SM1EAEAEUI91VPM2XFOA54BFP430BUPCFIPT400STRFGP10098 Unit of Measurement : EA$9,627.00 -
![FIS Simplex 1.6mm SM 9/125 Ultra LC/APC-LC/UPC 10 meters]()
FIS Simplex 1.6mm SM 9/125 Ultra LC/APC-LC/UPC 10 meter SKU: Y9LALUS10FISCU Unit of Measurement : EA$5.95 -
![EXFO SC Adapter for ELS-50 Light Source]()
-
![FIS 12F MPO Cassette MM OM3 (x1) MTP/M-LC/UPC Type B]()
FIS 12F MPO Cassette MM OM3 (x1) MTP/M-LC/UPC Type B SKU: F1MTPMLCOM312B Unit of Measurement : EA$150.00 -
![FIS P50 Label]()
-
![3-7/8" x 1 3/4" Economy Tie On Label Laminating Black/Yellow]()
3-7/8" x 1 3/4" Economy Tie On Label Laminating Black/Yellow SKU: F10100SLY Unit of Measurement : EA$24.25 -
![FIS SC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 20dB]()
FIS SC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 20dB SKU: F18741A20 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 12dB]()
FIS LC Attenuator Male to Female Singlemode 1310/1550 UPC Attenuator 12dB SKU: F18761A12 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![AFL Fusion Splicer Fiber Holder FH-FC-20 for 900um within 2mm Cable (Each)]()
AFL Fusion Splicer Fiber Holder FH-FC-20 for 900um within 2mm Cable (Each) SKU: S014696 Unit of Measurement : EA$290.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
