-
Viavi C-OSA-4055 APC CWDM OSA Module with SFP Bay SC Optical Adapter SKU: 2301/12 Unit of Measurement : EA$5,515.00 -
-
Signamax 24 Port Managed Switch, 10/100/1000 Base T/TX (RJ45) PoE+ 4 - 1000 Base SFP Ports, Full Power, 370 watts SKU: SC30020 Unit of Measurement : EA$1,117.00 -
FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 12dB SKU: F18751A12 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 14dB]()
FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 14dB SKU: F18751A14 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 20dB]()
FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 20dB SKU: F18751A20 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 16dB]()
FIS FC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 16dB SKU: F18751A16 Unit of Measurement : EA$11.95 Qty Buy as low as $10.76 -
![FIS Flat Drop Cable Assembly]()
FIS Flat Drop Cable Assembly, Singlemode, Toneable, 1 ZTAP Connector, Pigtail 100 feet | Plus Corning® SMF-28® Ultra Fiber SKU: ZDCT-1-HIP-P-100 Unit of Measurement : EA$41.53 -
![Zeus 2F Flat Drop SM Toneable ZTAP Connector-Pigtail 1000 ft]()
Zeus 2F Flat Drop SM Toneable ZTAP Connector-Pigtail 1000 ft SKU: ZDCT-1-HIP-P-1000 Unit of Measurement : EA$201.11 -
![EXFO Optical Loss Test Set 1310/1550nm MAX945SM1 VFL RF]()
EXFO Optical Loss Test Set 1310/1550nm MAX945SM1 VFL RF SKU: MAX945SM1EAEAEUI91VFLRFGP10098 Unit of Measurement : EA$6,895.00 -
![Cordura Carry Case for Work Table Accessories]()
-
![FIS Snap Pack]()
FIS Snap Pack, 12 Fiber, Multimode 50um OM2, SC/PC, Black Plate, 3 Meters SKU: F1DSC6LM50SPNBLK Unit of Measurement : EA$80.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
