-
-
Corning® Fan-Out Kit 6 Fiber Color Coded 25" Tubing Length SKU: FANBT2506 Unit of Measurement : EA$16.25 -
Corning® Cable Systems SC Connector Multimode UniCam 62.5 125um Composite SKU: 9500040 Unit of Measurement : EA$13.00 -
Corning® Ribbon Fan-Out Kit 12 Fiber 900um 36" Tubing Length SKU: RIBFAN1236 Unit of Measurement : EA$17.50 -
![Corning® Cable Systems SC Connector Multimode UniCam 62.5 125um Zirconia]()
Corning® Cable Systems SC Connector Multimode UniCam 62.5 125um Zirconia SKU: 9500041 Unit of Measurement : EA$16.50 -
![Corning® Ribbon Fan-Out Kit 12 Fiber 900um 25" Tubing Length]()
Corning® Ribbon Fan-Out Kit 12 Fiber 900um 25" Tubing Length SKU: RIBFAN1225 Unit of Measurement : EA$15.35 -
![Corning® Cable Systems ST Connector Multimode Unicam 62.5 125um Composite]()
Corning® Cable Systems ST Connector Multimode Unicam 62.5 125um Composite SKU: 9500050 Unit of Measurement : EA$13.00 -
![Corning® LC Simplex Multimode 3mm Single Pack]()
-
![Corning® Cable Systems ST Connector Singlemode UniCam 8.3 125um Zirconia]()
Corning® Cable Systems ST Connector Singlemode UniCam 8.3 125um Zirconia SKU: 9520051 Unit of Measurement : EA$19.00 -
![Corning® LC Connector Simplex 2mm Multimode Single Pack]()
Corning® LC Connector Simplex 2mm Multimode Single Pack SKU: 95100LCSP2 Unit of Measurement : EA$4.95 -
![Corning® Cable Systems ST Connector Multimode UniCam 62.5 125um Zirconia]()
Corning® Cable Systems ST Connector Multimode UniCam 62.5 125um Zirconia SKU: 9500051 Unit of Measurement : EA$16.65 -
![Corning® Splice Tray CCS (12) Fusion Splices or (6) Mass 12F Splices Type 4R for Corning® Wall Mounts]()
Corning® Splice Tray CCS (12) Fusion Splices or (6) Mass 12F Splices Type 4R for Corning® Wall Mounts SKU: M67110 Unit of Measurement : EA$50.75
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
